Search Site
Kanda Product A-Z List
Please select which letter you wish to view the list for:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0.5 Metre 10-way ISP lead
0.5 Metre 10-way ISP lead
0.5 metre (19 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP and handheld programmers.
0.5 metre (19 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP and handheld programmers.
Order Code
CR10W0-5M
CR10W0-5M
1 Metre 10-way ISP lead
1 Metre 10-way ISP lead
1 metre (39 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP, keyfob and handheld programmers.
1 metre (39 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP, keyfob and handheld programmers.
Order Code
CR10W1M
CR10W1M
10-5 way SIL Adapter
10 to 5-way SIL adapter for PIC programmers
Adapter for end of the 10-way programming lead that converts to 5-way SIL (Single In Line) connector. The pin-out of this 5-way SIL matches PICkit3 output.
Adapter for end of the 10-way programming lead that converts to 5-way SIL (Single In Line) connector. The pin-out of this 5-way SIL matches PICkit3 output.
Order Code
10SIL5
10SIL5
10-6way SIL Adapter
10 to 6-way SIL adapter for PIC programmers
Adapter for end of the 10-way programming lead that converts to 6-way SIL (Single In Line) connector. The pin-out of this 6-way SIL matches PICkit output.
Adapter for end of the 10-way programming lead that converts to 6-way SIL (Single In Line) connector. The pin-out of this 6-way SIL matches PICkit output.
Order Code
10SIL6
10SIL6
10-way to 6-way DIL Adapter
10-Way to 6-Way DIL Programmer Adapter
An adapter or convertor from standard Kanda 10-way programmer output to a AVR ISP 6-way DIL programming format. The 6-Way header is ...
An adapter or convertor from standard Kanda 10-way programmer output to a AVR ISP 6-way DIL programming format. The 6-Way header is ...
Order Code
10DIL6
10DIL6
10-way to 6-way Micromatch adapter
10-Way to 6-Way Micromatch Adapter
An adapter or convertor from standard Kanda 10-way programmer output to a 6-way Micromatch format for AVR ISP. The ...
An adapter or convertor from standard Kanda 10-way programmer output to a 6-way Micromatch format for AVR ISP. The ...
Order Code
10MICR6
10MICR6
10-way to RJ11 Adapter
10-way to RJ11 Adapter
Adapter for converting target interface of PIC hand held and keyfob programmers into an RJ11 connection. This connection type is used by Microchip ICD2.
Adapter for converting target interface of PIC hand held and keyfob programmers into an RJ11 connection. This connection type is used by Microchip ICD2.
Order Code
10RJ11
10RJ11
15cm Antenna cable with SMA RH thread
15cm Antenna cable with SMA RH thread
Reverse polarity, right hand thread SMA antenna cable. To fit...
Reverse polarity, right hand thread SMA antenna cable. To fit...
Order Code
SEC-G01R
SEC-G01R
16-WAY ICSP Cable
Spare 16-way ICSP Cable for FORTE PIC Programmer
16-way flying lead PIC ICSP adapter for FORTE PIC Programmer, also works with FORTE programmer. This adapter is always supplied with the FORTE PIC programmers, so this is a spare.
16-way flying lead PIC ICSP adapter for FORTE PIC Programmer, also works with FORTE programmer. This adapter is always supplied with the FORTE PIC programmers, so this is a spare.
Order Code
ICSPCAB16
ICSPCAB16
256KB AVR Keyfob
256KB Individual Keyfob Mini-programmer for AVR - USB
Supports ISP and UPDI
A completely portable programmer for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory. This programmer
Supports ISP and UPDI
A completely portable programmer for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory. This programmer
Order Code
KF0020V3
KF0020V3
256KB AVR Keyfob Starter Kit
AVR 256KB Keyfob AVR programmer USB Starter Kit
Supports ISP and UPDI
The new 256KB AVR keyfob programmer is a very small standalone programmer for AVR microcontollers with 256KB memory. AVR ISP and AVR UPDI Programmer...
Supports ISP and UPDI
The new 256KB AVR keyfob programmer is a very small standalone programmer for AVR microcontollers with 256KB memory. AVR ISP and AVR UPDI Programmer...
Order Code
KF0010V3
KF0010V3
3 dBi Dipole Antenna
SMA Dipole Antenna for Parani Products, Reverse thread
3 dBi Dipole Antenna for Parani 1000 series Serial to Bluetooth modules and access points.Also fits ZigBee to Serial converters.
3 dBi Dipole Antenna for Parani 1000 series Serial to Bluetooth modules and access points.Also fits ZigBee to Serial converters.
Order Code
DAT-G01R
DAT-G01R
300m USB Bluetooth Adapter Blue Soleil
300m USB to Bluetooth Wireless Adapter, Blue Soleil driver
USB to Bluetooth Wireless Adapter with 300 metre range - up to 400m with optional dipole antenna. Supports most Bluetooth profiles - mobile phones, headsets, networks, Internet...
USB to Bluetooth Wireless Adapter with 300 metre range - up to 400m with optional dipole antenna. Supports most Bluetooth profiles - mobile phones, headsets, networks, Internet...
Order Code
PARANI-UD100-3
PARANI-UD100-3
5 dBi Dipole Antenna
SMA Dipole Antenna for Parani Products, Reverse thread
5 dBi Dipole Antenna for Parani 1000 series Serial to Bluetooth modules and access points.Also fits ZigBee to Serial converters.
5 dBi Dipole Antenna for Parani 1000 series Serial to Bluetooth modules and access points.Also fits ZigBee to Serial converters.
Order Code
DAT5-G01R
DAT5-G01R
6-way AVR ISP Adapter
10 to 6-way AVR ISP with crimp housing
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP...
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP...
Order Code
10AVR6
10AVR6
6-way ISP for ASIC 21225
10 to 6-way AVR ISP Reversed
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP. For ASIC-21225 charger and rear of PCB...
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP. For ASIC-21225 charger and rear of PCB...
Order Code
10AVR6-R
10AVR6-R
6-way PDI Adapter
10-Way to 6-way PDI Adapter
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2 format for ATxmega PDI targets.
The pins available are VCC, GND plus PDI-CLOCK and PDI-DATA, using Atmel...
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2 format for ATxmega PDI targets.
The pins available are VCC, GND plus PDI-CLOCK and PDI-DATA, using Atmel...
Order Code
10PDI6
10PDI6
8-pin QFN Adapter
Wellon 8-pin QFN Adapter
Adapter for devices in 8-pin QFN package, 0.5mm pitch 3mm width. Please note that there are other 8-pin QFN packages that are different sizes so please check the programmer support list for the device you want to
Adapter for devices in 8-pin QFN package, 0.5mm pitch 3mm width. Please note that there are other 8-pin QFN packages that are different sizes so please check the programmer support list for the device you want to
Order Code
WL-DFN8-U101
WL-DFN8-U101
8-way ATE AVR Programmer Starter Kit
USB Starter kit for 8-way ATE AVR Programmer
ATE (Automated Test Equipment) version of our popular Kanda 8-way Handheld AVR Programmer with USB PC interface and software. Load the 8-way Handheld AVR Programmer from a PC ...
ATE (Automated Test Equipment) version of our popular Kanda 8-way Handheld AVR Programmer with USB PC interface and software. Load the 8-way Handheld AVR Programmer from a PC ...
Order Code
HH0810ATE
HH0810ATE
8-way ATE PIC Programmer Starter Kit
USB Starter kit for 8-way ATE PIC Programmer
ATE (Automated Test Equipment) version of 8-way Handheld PIC Programmer with USB PC interface and software.It is fitted with ATE interface for standalone operation...
ATE (Automated Test Equipment) version of 8-way Handheld PIC Programmer with USB PC interface and software.It is fitted with ATE interface for standalone operation...
Order Code
PIC-HH081ATE
PIC-HH081ATE
8-way AVR V3 Handheld
8-way Handheld Programmer Benefits
This 8-way standalone programmer makes it simple to update firmware in ATxmega, AVR D Series and AVR microcontrollers. Select slot needed with a rotary switch, then you plug it in...
This 8-way standalone programmer makes it simple to update firmware in ATxmega, AVR D Series and AVR microcontrollers. Select slot needed with a rotary switch, then you plug it in...
Order Code
HH0820V3
HH0820V3
8-way PIC Handheld Programmer Starter Kit
USB Starter kit for 8-way Handheld PIC Programmer
Easy to use portable PIC programmer that holds up to 8 different programs, with single button for target programming and easy slot selection...
Easy to use portable PIC programmer that holds up to 8 different programs, with single button for target programming and easy slot selection...
Order Code
PIC-HH0810
PIC-HH0810
8-Way Programmer Switch
Replacement Switch Stem for Kanda 8-Way Handheld Programmer
The 8-way switch on Kanda 8-way programmers has a separate stem. This can be lost occasionally. This is the replacement stem that plugs into the switch on the PCB, not the whole
The 8-way switch on Kanda 8-way programmers has a separate stem. This can be lost occasionally. This is the replacement stem that plugs into the switch on the PCB, not the whole
Order Code
TW-8S
TW-8S
8-way USB AVR Handheld Kit
USB Starter kit for 8-way AVR Handheld Programmer
Now supports JTAG programming as well as normal ISP programming
8-way AVR Handheld Programmer with 2MB of memory plus USB PC interface and software. Not for new users...
Now supports JTAG programming as well as normal ISP programming
8-way AVR Handheld Programmer with 2MB of memory plus USB PC interface and software. Not for new users...
Order Code
HH0810
HH0810
8-way USB AVR Handheld Programmer
8-way Hand Held AVR Programmer for AVR ISP
With TPI and JTAG programming as well as normal serial programming, optional adapter needed.
Version 3 is suggested for new users...
With TPI and JTAG programming as well as normal serial programming, optional adapter needed.
Version 3 is suggested for new users...
Order Code
HH0820
HH0820
ARM Cortex Header 2.0mm
ARM Cortex M0 SWD Header, 2 mm pitch
Adapter to convert SAM D handheld programmer output to Cortex M0 SWD Debug header layout. This adapter is 2 mm pitch...Order Code
10SWD2-0
10SWD2-0
ASIX Forte PIC Programmer
Forte PIC Programmer
High speed USB In-Circuit Serial programmer from Asix that supports all PIC microcontrollers, including dsPIC. If you need fast programming, then this is the best choice. It includes variable programming voltage (VPP) to
Order Code
FORTE
FORTE
AT17 Programming Board
AT17 Programming Board
Programming board with sockets for AT17 FPGA configurators in 20-pin PLCC and 8-pin SOIC packages. The EEISP-U ISP programmer connects to the header on the board making this a socket programmer...
Programming board with sockets for AT17 FPGA configurators in 20-pin PLCC and 8-pin SOIC packages. The EEISP-U ISP programmer connects to the header on the board making this a socket programmer...
Order Code
EE-BOARD-AT17
EE-BOARD-AT17
Atmel ICE Cables
Cable Adapter for ATATMEL-ICE Programmer and Debugger
0.1" (2.54mm) adapter kit for AVR 6-pin and 10-pin ISP, TPI and DebugWire plus 10-pin JTAG interfaces. Connects to Atmel ICE 1.27mm AVR output connector...
0.1" (2.54mm) adapter kit for AVR 6-pin and 10-pin ISP, TPI and DebugWire plus 10-pin JTAG interfaces. Connects to Atmel ICE 1.27mm AVR output connector...
Order Code
ATATMEL-ICE-ADAPTER
ATATMEL-ICE-ADAPTER
AVR 10-way to 6 Flying lead adapter
AVR 10-Way to 6 Flying lead Adapter
This product is setup for AVR microcontrollers and Serial EEPROMs and there is a different version for PIC microcontrollers.
An adapter for standard Kanda 10-way programmer output to a 6...
This product is setup for AVR microcontrollers and Serial EEPROMs and there is a different version for PIC microcontrollers.
An adapter for standard Kanda 10-way programmer output to a 6...
Order Code
10FLEX6-A
10FLEX6-A
AVR 256KB Keyfob Programmer Field Service Pack
Field Service Pack for 256K AVR USB Keyfob programmer
AVR ISP and AVR UPDI Programmer.
A Pack of 6 portable 256KB USB keyfob mini-programmers for In System Programming of AVR microcontrollers plus a USB PC Interface and software ...
AVR ISP and AVR UPDI Programmer.
A Pack of 6 portable 256KB USB keyfob mini-programmers for In System Programming of AVR microcontrollers plus a USB PC Interface and software ...
Order Code
KF0040V3
KF0040V3
AVR 256KB Keyfob programmers 5 Pack
Pack of 5 256KB Keyfob AVR programmer
Supports ISP and UPDI interfaces. A pack of 5 completely portable programmers for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory...
Supports ISP and UPDI interfaces. A pack of 5 completely portable programmers for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory...
Order Code
KF0030V3
KF0030V3
AVR and ATxmega 8-way Handheld V3 Kit
8-way ATxmega, UPDI and AVR Handheld Programmer
Standalone programmer with 4MB of memory (512KB per slot) plus USB PC interface and software. Load the programmer from a PC using the USB PC interface and the Software and then you do not n
Standalone programmer with 4MB of memory (512KB per slot) plus USB PC interface and software. Load the programmer from a PC using the USB PC interface and the Software and then you do not n
Order Code
HH0810V3
HH0810V3
AVR and ATxmega Handheld V3
AVR and XMEGA Handheld Programmer
Version 3 AVR Handheld standalone Programmer with single button operation, supports all programming interfaces and AVR D series microcontrollers...
Version 3 AVR Handheld standalone Programmer with single button operation, supports all programming interfaces and AVR D series microcontrollers...
Order Code
HH0120V3
HH0120V3
AVR and ATxmega Handheld V3 Starter Kit
AVR and XMEGA V3 Handheld Programmer Kit
Version 3 AVR Standalone Programmer. Supports all AVR and ATxmega Microcontrollers including ISP, JTAG, UPDI, TPI and PDI. New power options, faster speed, AVR D series support...
Version 3 AVR Standalone Programmer. Supports all AVR and ATxmega Microcontrollers including ISP, JTAG, UPDI, TPI and PDI. New power options, faster speed, AVR D series support...
Order Code
HH0110V3
HH0110V3
AVR ICE PCBA with Adapters
ATATMEL-ICE-PCBA AVR ICE Debugger with Adapters included
It has all the function of expensive boxed versions but is much cheaper. and Kanda have included an adapter board with this version to convert to 6 and 10-way ISP and 10-way JTAG..
It has all the function of expensive boxed versions but is much cheaper. and Kanda have included an adapter board with this version to convert to 6 and 10-way ISP and 10-way JTAG..
Order Code
ATATMEL-ICE
ATATMEL-ICE
AVR ISP 1.27mm
Atmel AVR ISP 1.27mm adapter
Adapter to convert standard 2.54mm (0.1") AVR ISP output to 1.27mm (0.05") pitch. This adapter uses standard 10-way ISP target layout.
Adapter to convert standard 2.54mm (0.1") AVR ISP output to 1.27mm (0.05") pitch. This adapter uses standard 10-way ISP target layout.
Order Code
10ISP1-27
10ISP1-27
AVR ISP 2.0mm Adapter
AVR ISP 2.0mm Adapter
Adapter to convert standard 10-way Atmel AVR ISP from 2.54mm (0.1") pitch to 2.0mm pitch.
Adapter to convert standard 10-way Atmel AVR ISP from 2.54mm (0.1") pitch to 2.0mm pitch.
Order Code
10ISP2-0
10ISP2-0
AVR JTAG 1.27mm Adapter
Atmel AVR JTAG Adapter 1.27mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 1.27mm (0.05") pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
Adapter to convert normal 10-way Atmel AVR JTAG connector to 1.27mm (0.05") pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
Order Code
10JTAG1-27
10JTAG1-27
AVR JTAG Adapter 2.0mm
AVR JTAG Adapter - 2.0mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 2.0mm pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.Order Code
10JTAG2-0
10JTAG2-0
AVR JTAG ICE II Emulator
AVR JTAG ICE Emulator for all AVR microntrollers
New AVR Emulator that is compatible with Atmel's AVR JTAGICE MkII, Type B. Like AVR JTAGICE MkII, it interfaces with Atmel Studio development environment and AVRDude programming...
New AVR Emulator that is compatible with Atmel's AVR JTAGICE MkII, Type B. Like AVR JTAGICE MkII, it interfaces with Atmel Studio development environment and AVRDude programming...
Order Code
JTAGAVR-II
JTAGAVR-II
AVR UPDI Programmer
Atmel AVR UPDI Programmer
Kanda's latest USB AVR programmer supports AVR ISP, TPI, UPDI and JTAG programming interfaces. It is fast and reliable with Kanda's popular software interface to make your device programming as efficient as...
Kanda's latest USB AVR programmer supports AVR ISP, TPI, UPDI and JTAG programming interfaces. It is fast and reliable with Kanda's popular software interface to make your device programming as efficient as...
Order Code
AVRUPDI
AVRUPDI
AVRUPDI 12V Generator
12V Generator Module for AVRUPDI Programmer
This module can be fitted to AVRUPDI programmer to give 12V entry for TPI and UPDI interfaces...
This module can be fitted to AVRUPDI programmer to give 12V entry for TPI and UPDI interfaces...
Order Code
12V-GEN
12V-GEN
Batteries for Handheld Programmer
Handheld Programmer Batteries
Pack of 2 9V PP3 batteries for AVR, PIC and Serial EEPROM handheld programmers...
Pack of 2 9V PP3 batteries for AVR, PIC and Serial EEPROM handheld programmers...
Order Code
BAT-HHP
BAT-HHP
Battery Pack for PARANI-SD200
Battery Pack for PARANI-SD200
External battery pack for PARANI-SD200 Bluetooth to Serial Adapter.
- When using battery pack for SD200 : Typical 1.5V -AA alkaline batteries (2500mAh) - Avg. 11hr@9600bps
External battery pack for PARANI-SD200 Bluetooth to Serial Adapter.
- When using battery pack for SD200 : Typical 1.5V -AA alkaline batteries (2500mAh) - Avg. 11hr@9600bps
Order Code
PARANI-BPC
PARANI-BPC
Customer Connectors, adapters and add-ons
Customer Connectors, Adapters and Add-ons
QUSB2SK with No QUSB2 Module fitted
Main board with FPGA but no QUSB2 module.
QUSB2SK with No QUSB2 Module fitted
Main board with FPGA but no QUSB2 module.
Order Code
CUSTOM
CUSTOM
Cyclone FX Universal
Cyclone FX Universal Programmer
The Cyclone FX is PEmicro's most advanced in-circuit, stand-alone flash programmer which will in-circuit program, debug, and test MCU devices either in a stand-alone mode or controlled from a PC...
The Cyclone FX is PEmicro's most advanced in-circuit, stand-alone flash programmer which will in-circuit program, debug, and test MCU devices either in a stand-alone mode or controlled from a PC...
Order Code
CYCLONE-FX-UNIV
CYCLONE-FX-UNIV
Cyclone LC ARM
Cyclone LC ARM Programmer
PEmicro's Cyclone LC ARM flash programmers are powerful tools to in-circuit program, debug, and test ARM devices in either stand-alone mode or controlled from a PC.
PEmicro's Cyclone LC ARM flash programmers are powerful tools to in-circuit program, debug, and test ARM devices in either stand-alone mode or controlled from a PC.
Order Code
CYCLONE-LC-ARM
CYCLONE-LC-ARM
Cyclone LC Universal
Cyclone LC Universal Programmer
PEmicro's Cyclone LC flash programmers are powerful tools to in-circuit program, debug, and test MCU devices in either stand-alone mode or controlled from a PC...
PEmicro's Cyclone LC flash programmers are powerful tools to in-circuit program, debug, and test MCU devices in either stand-alone mode or controlled from a PC...
Order Code
CYCLONE-LC-UNIV
CYCLONE-LC-UNIV
EEPROM Programming Board
Serial EEPROM Programming Board
Simple programming board for in-socket programming of serial EEPROMs with Kanda ISP programmer. Supports 93, 24 and 25 series serial EEPROMs from all manufacturers in 8-pin DIL packages.
Simple programming board for in-socket programming of serial EEPROMs with Kanda ISP programmer. Supports 93, 24 and 25 series serial EEPROMs from all manufacturers in 8-pin DIL packages.
Order Code
EE-BOARD
EE-BOARD
EEPROM ZIF Board
Serial EEPROM Programming Board
Programming board for 24, 25 and 93 series serial EEPROMs, in 8-pin DIP or SOIC packages. Powered by supplied mini-USB lead. Used with EEISP-U...
Programming board for 24, 25 and 93 series serial EEPROMs, in 8-pin DIP or SOIC packages. Powered by supplied mini-USB lead. Used with EEISP-U...
Order Code
EE-BOARD-SMD
EE-BOARD-SMD
Extended Battery Pack for SD1000-Zigbee
Extended Battery Pack for SD1000 Bluetooth and Zigbee Units
Extended battery pack to allow PARANI-SD1000 Bluetooth to Serial Adapter to operate for up to 16 hours without recharging. Also fits USB and serial to ZigBee modules.
Extended battery pack to allow PARANI-SD1000 Bluetooth to Serial Adapter to operate for up to 16 hours without recharging. Also fits USB and serial to ZigBee modules.
Order Code
PARANI-BPC3
PARANI-BPC3
Handheld AVR Programmer USB Starter Kit
USB Starter kit for 256K Hand Held AVR Programmer
Handheld AVR Programmer with 256KB of memory plus USB PC interface and software. Load the programmer from a PC and it is completely portable, with one button operation...
Handheld AVR Programmer with 256KB of memory plus USB PC interface and software. Load the programmer from a PC and it is completely portable, with one button operation...
Order Code
HH0110
HH0110
IC Clips for EEPROM ISP
IC Test Clips for EEISP-U
3M IC test clip set for connecting EEISP-U programmer to devices in circuit. If you want to program or read devices without removing them from a PCB, these clips allow you to do it.
3M IC test clip set for connecting EEISP-U programmer to devices in circuit. If you want to program or read devices without removing them from a PCB, these clips allow you to do it.
Order Code
E2-CLIPS
E2-CLIPS
IC Test clips for PRESTO
IC Test Clips
IC test clip set for connecting to devices in circuit. If you want to program or read devices without removing them from a PCB, these clips allow you to do it.
IC test clip set for connecting to devices in circuit. If you want to program or read devices without removing them from a PCB, these clips allow you to do it.
Order Code
PRESTO-CLIPS
PRESTO-CLIPS
JTAG Adapter for AVR Handheld Programmer
JTAG Adapter for AVR Handheld Programmer
This adapter lets you use the JTAG programming algorithm with the Kanda AVR or AVR/ATxmega USB Handheld programmer, with software version v1.2.5 on.
This adapter lets you use the JTAG programming algorithm with the Kanda AVR or AVR/ATxmega USB Handheld programmer, with software version v1.2.5 on.
Order Code
AVRHHP-JTAG
AVRHHP-JTAG
JTAG Adapters
JTAG Adapters for STK200 board
Two adapters to allow JTAG tools to be connected to port pins of STK200 board. These adapters are supplied with JTAGAVR....
Two adapters to allow JTAG tools to be connected to port pins of STK200 board. These adapters are supplied with JTAGAVR....
Order Code
JTAG-AB
JTAG-AB
Keyfob Extension Cable
Keyfob Extension Cable
Standard keyfob has 2 inch (50mm) ISP cable. This extension cable provides a 6 inch (150mm) extension if you require more length to reach your connector...
Standard keyfob has 2 inch (50mm) ISP cable. This extension cable provides a 6 inch (150mm) extension if you require more length to reach your connector...
Order Code
KF-EXT
KF-EXT
MPLAB Snap Debugger/Programmer
MPLAB Snap Debugger/Programmer
Microchip Technology MPLAB Snap In-Circuit Debugger/Programmer allows fast and easy debugging and programming of most PIC, AVR and SAM Flash microcontrollers and dsPIC...
Microchip Technology MPLAB Snap In-Circuit Debugger/Programmer allows fast and easy debugging and programming of most PIC, AVR and SAM Flash microcontrollers and dsPIC...
Order Code
MPLAB-SNAP
MPLAB-SNAP
MULTILINK High Speed
PEmicro’s USB Multilink Universal FX
High-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on NXP & STM MCU and ARM devices...
High-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on NXP & STM MCU and ARM devices...
Order Code
USB-ML-UNIV-FX
USB-ML-UNIV-FX
Multilink ACP
PEmicro’s Multilink ACP
It is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex devices. It connects between a USB port on a Windows machine and the standard debug co
It is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex devices. It connects between a USB port on a Windows machine and the standard debug co
Order Code
USB-ML-ACP
USB-ML-ACP
Multilink Debug Probe
PE Micro Multilink Debug Probe
PEmicro’s Multilink is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex and NXP/STmicroelectronics processor families.
PEmicro’s Multilink is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex and NXP/STmicroelectronics processor families.
Order Code
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL
OTG Cable Micro B
USB OTG Cable Type Micro B
This cable provides a USB Host that lets you connect your Android phone to Kanda USB Dongle. This allows you to load your Kanda Handheld programmer from your Android phone.
Order Code
OTG-MICRO-B
OTG-MICRO-B
OTG Cable Type C
USB OTG Cable Type C
This cable provides a USB Host that lets you connect your Android phone to Kanda USB Dongle. This allows you to load your Kanda Handheld programmer from your Android phone.
Order Code
OTG-C
OTG-C
Parani Serial to Bluetooth Embedded Module Antenna Cable
1 metre extension cable for all antennas
This extension cable can be used with all OLDER Parani antenna options WITH LEFT HAND THREAD including Standard stub antenna, dipole and patch antenna.
For PARANI-ESD01-1 embedded serial to
This extension cable can be used with all OLDER Parani antenna options WITH LEFT HAND THREAD including Standard stub antenna, dipole and patch antenna.
For PARANI-ESD01-1 embedded serial to
Order Code
RFC-G01
RFC-G01
PIC 10-way to 6 Flying lead adapter
PIC 10-Way to 6 Flying lead Adapter
This version is for Kanda PIC programmers and there is a different version for AVR and EEPROM.
An adapter for standard Kanda 10-way programmer output to a 6 by 1-way format. The 6 flying...
This version is for Kanda PIC programmers and there is a different version for AVR and EEPROM.
An adapter for standard Kanda 10-way programmer output to a 6 by 1-way format. The 6 flying...
Order Code
10FLEX6
10FLEX6
PIC Handheld Programmer USB Starter Kit
USB Starter kit for Handheld PIC Programmer
Handheld PIC Programmer with USB PC interface and software. Load the PIC Handheld Programmer from a PC using the USB loader and simple software and then you do not need PC...
Handheld PIC Programmer with USB PC interface and software. Load the PIC Handheld Programmer from a PC using the USB loader and simple software and then you do not need PC...
Order Code
PIC-HH0110
PIC-HH0110
PIC ICSP to RJ11 Adapter
PIC ICSP to RJ11 Adapter
Adapter for connecting PICKIT3, PICKIT4 or SNAP to boards with RJ11 connector as ICSP and emulator interface.
Adapter for connecting PICKIT3, PICKIT4 or SNAP to boards with RJ11 connector as ICSP and emulator interface.
Order Code
PIC-ICSP-RJ11
PIC-ICSP-RJ11
PIC Programmer 8-way ICSP Cable
Spare ICSP Cable for PRESTO PIC Programmer
7-way flying lead PIC ICSP adapter for PRESTO PIC Progranmmer. This adapter is always supplied with PRESTO PIC programmer, so this is a spare.
7-way flying lead PIC ICSP adapter for PRESTO PIC Progranmmer. This adapter is always supplied with PRESTO PIC programmer, so this is a spare.
Order Code
ICSPCAB8
ICSPCAB8
PIC to AVR Adapter
PIC to AVR Adapter for Asix PRESTO and FORTE Programmers
Adapter to convert standard output format of Asix PRESTO and FORTE Programmers to AVR ISP format.
Adapter to convert standard output format of Asix PRESTO and FORTE Programmers to AVR ISP format.
Order Code
HPRAVR
HPRAVR
PIC USB Keyfob Field Service Pack
Field Service Pack for PIC USB Keyfob Mini-programmer
A Pack of 6 PIC portable USB keyfob mini-programmers for In System Programming of PIC16F and PIC18F flash microcontrollers plus a USB port PC Interface and software...
A Pack of 6 PIC portable USB keyfob mini-programmers for In System Programming of PIC16F and PIC18F flash microcontrollers plus a USB port PC Interface and software...
Order Code
PIC-KF0040U
PIC-KF0040U
PIC USB keyfob Programmer Multipack
PIC USB Keyfob Mini-programmer Multi-Pack
A Pack of 5 individual USB PIC keyfob mini-programmers for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families. Ideal for field and production...
A Pack of 5 individual USB PIC keyfob mini-programmers for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families. Ideal for field and production...
Order Code
PIC-KF0030U
PIC-KF0030U
PICKIT4 Programmer
PICKIT 4 Programmer and Emulator
Microchip PICkit4 programmer and emulator for PIC microcontrollers. The unit runs from MPLAB IDE (MPLAB X versions) or can be run from separate programming software.
Microchip PICkit4 programmer and emulator for PIC microcontrollers. The unit runs from MPLAB IDE (MPLAB X versions) or can be run from separate programming software.
Order Code
PICKIT4
PICKIT4
Portable AVR Programmer
Standalone Portable AVR Programmer
Portable AVR programmer with 31 slots for different targets. Easily loaded from PC, battery powered and simple to use...
Portable AVR programmer with 31 slots for different targets. Easily loaded from PC, battery powered and simple to use...
Order Code
PP0110
PP0110
PRESTO 3V3 Adapter
HPR3V3 Level Shifter
HPR3V3 is an optional accessory to the PRESTO programmer for programming of stand-alone 3.3 V devices (as for example DataFlash Memories).
HPR3V3 is an optional accessory to the PRESTO programmer for programming of stand-alone 3.3 V devices (as for example DataFlash Memories).
Order Code
HPR3V3
HPR3V3
PRESTO USB ISP for Atmel 89S Microcontrollers
PRESTO USB port programmer
Very fast microcontroller ISP programmer self powered from USB bus with enhanced ISP programming capability. Supports a wide range of microcontrollers including all 89S series microcontrollers at 3-5V target...
Very fast microcontroller ISP programmer self powered from USB bus with enhanced ISP programming capability. Supports a wide range of microcontrollers including all 89S series microcontrollers at 3-5V target...
Order Code
PRESTO-89S
PRESTO-89S
PRESTO USB PIC Programmer
PRESTO USB PIC programmer
Very fast microcontroller ICSP programmer self powered from USB bus with enhanced ICSP programming capability. Supports a wide range of Microchip microcontrollers...
Very fast microcontroller ICSP programmer self powered from USB bus with enhanced ICSP programming capability. Supports a wide range of Microchip microcontrollers...
Order Code
PRESTO
PRESTO
PRESTO USB Programmer for Memory
PRESTO USB programmer
Very fast in system programmer, self powered from USB bus, with enhanced ICSP programming capability. This USB programmer supports a wide range of serial memory, including Serial EEPROM, Serial Flash and Dataflash,
Very fast in system programmer, self powered from USB bus, with enhanced ICSP programming capability. This USB programmer supports a wide range of serial memory, including Serial EEPROM, Serial Flash and Dataflash,
Order Code
PRESTO-M
PRESTO-M
Quick USB 10 Chip Pack
Quick USB Chip Pack
Get the QuickUSB advantage in a chip!
What if I would like to use QuickUSB in ...
Get the QuickUSB advantage in a chip!
What if I would like to use QuickUSB in ...
Order Code
QUSBCP10
QUSBCP10
Quick USB Module
Quick USB Module
The quickest way to add high speed USB 2.0 to your product is with QuickUSB embedded USB module. Since all the USB functionality is in the QuickUSB module, you don't need to learn USB...
The quickest way to add high speed USB 2.0 to your product is with QuickUSB embedded USB module. Since all the USB functionality is in the QuickUSB module, you don't need to learn USB...
Order Code
QUSB2
QUSB2
SAM D-L 8-way Starter Kit
Atmel ARM SAMD, SAMC and SAML 8-way Handheld Programmer Starter Kit
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in product
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in product
Order Code
SAM-HH0810
SAM-HH0810
SAM Handheld Programmer
Atmel ARM SAMD-L-C Handheld Programmer
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in production or to do firmware updates
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in production or to do firmware updates
Order Code
SAM-HH0120
SAM-HH0120
SAM Handheld Programmer Starter Kit
Atmel ARM SAMD-L-C Handheld Programmer Starter Kit
Atmel SAM D, C and L series are becoming increasingly popular. Kanda SAM programmer makes it easy to program these devices in production or to do firmware updates. Includes USB loader...
Atmel SAM D, C and L series are becoming increasingly popular. Kanda SAM programmer makes it easy to program these devices in production or to do firmware updates. Includes USB loader...
Order Code
SAM-HH0110
SAM-HH0110
SAMD-L 8-way Handheld Programmer
Atmel ARM SAMD, SAMC and SAM L 8-way Handheld Programmer
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in production or fir
Order Code
SAM-HH0820
SAM-HH0820
SD1000-01 Serial to Bluetooth Converter
Parani SD1000-01 Serial to Bluetooth Converter
This is the latest generation of Bluetooth adapters, using Bluetooth v2.0 + EDR, with different battery, antenna and power supply options...
This is the latest generation of Bluetooth adapters, using Bluetooth v2.0 + EDR, with different battery, antenna and power supply options...
Order Code
PARANI-SD1000
PARANI-SD1000
SD1000-B1 Serial to Bluetooth Converter Bulk Pack
Parani SD1000-B10 Serial to Bluetooth Converter Bulk Pack
This is the latest generation of Bluetooth adapters, using Bluetooth v2.0 + EDR. This pack of 10 BLUETOOTH v2.0 TO RS232 Adapters comes with stub antennas and DC power lead but
This is the latest generation of Bluetooth adapters, using Bluetooth v2.0 + EDR. This pack of 10 BLUETOOTH v2.0 TO RS232 Adapters comes with stub antennas and DC power lead but
Order Code
PARANI-SD1000-B10
PARANI-SD1000-B10
Sena 1dBi Stub Antenna SMA RH
Sena 1dBi Stub Antenna SMA RH
1 dBi Stub antenna with right hand SMA plug for PARANI Bluetooth series and ZigBee units.
1 dBi Stub antenna with right hand SMA plug for PARANI Bluetooth series and ZigBee units.
Order Code
SAT-G01R
SAT-G01R
Sena 1M Extension Cable
Sena Extension Cable for Right Hand Antenna
1 metre (3 foot 3 inch) extension cable for right hand thread SMA antenna, including stub, dipole and patch antenna.
1 metre (3 foot 3 inch) extension cable for right hand thread SMA antenna, including stub, dipole and patch antenna.
Order Code
RFC-G01R
RFC-G01R
Sena DB9 Gender Changer
Sena DB9 Gender Changer
Gender changer, female to male, for Sena Bluetooth and ZigBee serial converters or general usage.
Gender changer, female to male, for Sena Bluetooth and ZigBee serial converters or general usage.
Order Code
FM9GD-G01
FM9GD-G01
Sena DC Power Cable
Sena DC Power Cable for Bluetooth and ZigBee units
Included with full kits. Can be added to SD1000-A1 or ZS10-A1
Included with full kits. Can be added to SD1000-A1 or ZS10-A1
Order Code
DPA-G01
DPA-G01
Sena Left to Right SMA Adapter
Sena Left to Right SMA Adapter
Sena Left to Right Handed SMA Adapter for Bluetool and ZigBee antenna. Allows connection of RH and LH SMA connectors.
Sena Left to Right Handed SMA Adapter for Bluetool and ZigBee antenna. Allows connection of RH and LH SMA connectors.
Order Code
SLR-G01
SLR-G01
Sena Patch Antenna for Bluetooth and ZigBee
Patch Antenna for Bluetooth and Zigbee products
Right hand patch antenna to increase the range of Parani Serial to Bluetooth adapters and ZigBee units...
Right hand patch antenna to increase the range of Parani Serial to Bluetooth adapters and ZigBee units...
Order Code
PAT-G01R
PAT-G01R
Sena Patch Antenna, Left Hand
Patch Antenna for Bluetooth and Zigbee products
Left hand patch antenna to increase the range of older Parani Serial to Bluetooth adapters (SD100/200 series) and Embedded Serial to Bluetooth modules (ESD110/210)
Left hand patch antenna to increase the range of older Parani Serial to Bluetooth adapters (SD100/200 series) and Embedded Serial to Bluetooth modules (ESD110/210)
Order Code
PAT-G01
PAT-G01
Sena Power Supply Unit
OPA-G01 Sena Power supply unit for Parani products
Power supply unit (wall transformer for SD1000 series and ZS10 ZigBee serial converter. This unit is 110-240V, 50/60Hz
Power supply unit (wall transformer for SD1000 series and ZS10 ZigBee serial converter. This unit is 110-240V, 50/60Hz
Order Code
OPA-G01
OPA-G01
Serial EEPROM ISP Programmer
USB ISP for Serial EEPROMs and AT17 Configurators
USB In System Programmer - ISP - for 24C, 25C and 93C serial EEPROM devices from any manufacturer and Atmel AT17LVxxx and AT17Fxxx FPGA configurators....
USB In System Programmer - ISP - for 24C, 25C and 93C serial EEPROM devices from any manufacturer and Atmel AT17LVxxx and AT17Fxxx FPGA configurators....
Order Code
EEISP-U
EEISP-U
Serial to Bluetooth Converter USB Power Lead
USB Power Cable
Power cable for Parani-SD1000 serial to Bluetooth wireless adapters and ZigBee serial adapters. It plugs into USB port on PC and provides power to the adapter from the USB port.
Power cable for Parani-SD1000 serial to Bluetooth wireless adapters and ZigBee serial adapters. It plugs into USB port on PC and provides power to the adapter from the USB port.
Order Code
UPA-G01
UPA-G01
Single PIC Keyfob Programmer
PIC USB Keyfob Mini-programmer
Single individual USB PIC keyfob mini-programmer WITHOUT USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Single individual USB PIC keyfob mini-programmer WITHOUT USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Order Code
PIC-KF0020U
PIC-KF0020U
Standalone Portable PIC Programmer
Standalone Portable PIC Programmer
The standalone Portable Programmer is a new more adaptable version of Kanda's long established HandHeld Programmer. It has 31 program slots that are loaded from the PC and selected using keypad
The standalone Portable Programmer is a new more adaptable version of Kanda's long established HandHeld Programmer. It has 31 program slots that are loaded from the PC and selected using keypad
Order Code
PIC-PP0110
PIC-PP0110
Standard Battery Pack for SD1000
Standard Battery Pack for SD1000 Bluetooth and Zigbee Units
Standard battery pack to allow PARANI-SD1000 Bluetooth to Serial Adapter or serial and USB to Zigbee wireless units to operate without a power supply.
Standard battery pack to allow PARANI-SD1000 Bluetooth to Serial Adapter or serial and USB to Zigbee wireless units to operate without a power supply.
Order Code
PARANI-BPC2
PARANI-BPC2
SWD Adapter 1.27mm
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 1.27mm or 0.05 inch pitch...
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 1.27mm or 0.05 inch pitch...
Order Code
10SWD1-27
10SWD1-27
SWD Adapter 2.54mm
ARM Cortex M0 SWD Header, 0.1 inch or 2.54mm pitch
Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 2.54mm or 0.1 inch pitch...
Order Code
10SWD2-54
10SWD2-54
TQFP64 Adapter for Microchip PIC Microcontrollers
0.5mm pitch TQFP64 socket adapter for Microchip PIC
Converts from DIL 48-pin ZIF socket toTQFP64 (0.5mm pitch 11x11)
Converts from DIL 48-pin ZIF socket toTQFP64 (0.5mm pitch 11x11)
Order Code
WL-TQFP64-6585
WL-TQFP64-6585
TSOP40 socket adapter
TSOP40 Adapter for Wellon Universal Programmers
For devices in 40 pin TSOP package. Max length is 10.10mm, package width is 14mm, pin pitch is 0.5mm.
For devices in 40 pin TSOP package. Max length is 10.10mm, package width is 14mm, pin pitch is 0.5mm.
Order Code
WL-TSOP40-U011
WL-TSOP40-U011
Universal ISP Board with ZIF Socket
Programming Adapter with ZIF Socket
ISP2ZIF is an adapter for programming of all types of devices using In-Circuit Serial/In-System Programming (ICSP/ISP). The adapter is fitted with the 40-pin Zero Insertion Force socket (ZIF) which acce
ISP2ZIF is an adapter for programming of all types of devices using In-Circuit Serial/In-System Programming (ICSP/ISP). The adapter is fitted with the 40-pin Zero Insertion Force socket (ZIF) which acce
Order Code
ISP2ZIF
ISP2ZIF
UPDI 12V Adapter
ATtiny 12V UPDI Adapter
UPDI interface is supported on V3 version of Handheld Programmer only and AVRUPDI Programmer
Adapter to supply 12V pulse for ATtiny UPDI programming...
Adapter to supply 12V pulse for ATtiny UPDI programming...
Order Code
UPDI-12V
UPDI-12V
USB 8-Way PIC Handheld Programmer
USB 8-Way Handheld PIC Programmer
Multiple program version of the popular Kanda handheld field and production programmer with 2 MB of memory. Just load the programmer...
Multiple program version of the popular Kanda handheld field and production programmer with 2 MB of memory. Just load the programmer...
Order Code
PIC-HH0820
PIC-HH0820
USB AVR Handheld Programmer
256K Hand Held Programmer for AVR
Now with JTAG support
Standalone Programmer, for simple Field and Production programming of AVR microcontrollers, not recommended for new users...
Now with JTAG support
Standalone Programmer, for simple Field and Production programming of AVR microcontrollers, not recommended for new users...
Order Code
HH0120
HH0120
USB AVR ISP In System Programmer
Low cost USB port AVR ISP
The low cost AVRISP-U has its own software or can be run from Studio. It can power target and now has stronger drive to program difficult ISP circuits...
The low cost AVRISP-U has its own software or can be run from Studio. It can power target and now has stronger drive to program difficult ISP circuits...
Order Code
AVRISP-U
AVRISP-U
USB Bluetooth Adapter
USB to Bluetooth serial Adapter
The Parani-SD1000U is a class 1 type Bluetooth USB adapter for Serial Port Replacement that supports 300 meters of wireless transmission distance...
The Parani-SD1000U is a class 1 type Bluetooth USB adapter for Serial Port Replacement that supports 300 meters of wireless transmission distance...
Order Code
PARANI-SD1000U
PARANI-SD1000U
USB Dongle3 for Handheld Programmer
USB Interface for Handheld Programmers
USB PC interface for all Handheld Programmers, Portable Programmer and AVR Keyfob programmers(Dongle3).
USB PC interface for all Handheld Programmers, Portable Programmer and AVR Keyfob programmers(Dongle3).
Order Code
DONGLE3
DONGLE3
USB Handheld PIC Programmer
Handheld Programmer for PIC Microcontrollers
Easy to use, mobile and powerful handheld programmer for field programming, trouble free production...
Easy to use, mobile and powerful handheld programmer for field programming, trouble free production...
Order Code
PIC-HH0120
PIC-HH0120
USB Handheld Serial EEPROM Programmer
USB Hand Held Programmer for Serial EEPROMs
A very simple to use HandHeld Programmer that is loaded from the PC using the Starter Kit. Once the programmer is loaded with device information and data, then you just plug it into your target
A very simple to use HandHeld Programmer that is loaded from the PC using the Starter Kit. Once the programmer is loaded with device information and data, then you just plug it into your target
Order Code
HH0120EE
HH0120EE
USB PIC Keyfob Programmer Kit
PIC USB Keyfob Mini-programmer Starter Kit
Single individual USB PIC keyfob mini-programmer with USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Single individual USB PIC keyfob mini-programmer with USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Order Code
PIC-KF0010U
PIC-KF0010U
USB Serial EEPROM Handheld Programmer Starter Kit
USB Starter Kit for Serial EEPROM Hand Held Programmer
A very simple to use Hand Held Programmer for Serial EEPROM devices that is loaded from the PC using the USB PC interface and wizard software included in this Starter Kit.
A very simple to use Hand Held Programmer for Serial EEPROM devices that is loaded from the PC using the USB PC interface and wizard software included in this Starter Kit.
Order Code
HH0110EE
HH0110EE
VP-598 Universal Programmer
VP-598 USB Universal Programmer with 48-pin ZIF Socket
This programmer is for a range of devices, including lots of memory chips, PIC microcontrollers, EEPROMs, dsPIC, AVR and other microcontrollers like AT89, plus PLDs and flash...
This programmer is for a range of devices, including lots of memory chips, PIC microcontrollers, EEPROMs, dsPIC, AVR and other microcontrollers like AT89, plus PLDs and flash...
Order Code
VP-598
VP-598
Wellon Automotive Programmer
Wellon Automotive Programmer
This programmer is designed for vehicle electronics. If you need to program devices in ECU or other car electronics, then this programmer is ideal for you...
This programmer is designed for vehicle electronics. If you need to program devices in ECU or other car electronics, then this programmer is ideal for you...
Order Code
AUTO300
AUTO300
Wellon BGA64 Socket Adapter
Wellon BGA64 Socket Adapter
This socket family has a number of variants, which will need to be specified if you order this socket....
This socket family has a number of variants, which will need to be specified if you order this socket....
Order Code
WL-EBGA64
WL-EBGA64
Wellon BGA64-E145 Adapter
Wellon 64-pin BGA adapter
Wellon WL-EBGA64-E145-1 64-pin BGA adapter for Wellon universal programmers.
This adapter is 1.0mm pitch 8x8, 10x13mm chips.
Wellon WL-EBGA64-E145-1 64-pin BGA adapter for Wellon universal programmers.
This adapter is 1.0mm pitch 8x8, 10x13mm chips.
Order Code
WL-EBGA64-E145-1
WL-EBGA64-E145-1
Wellon PQFP80-M402 Socket Converter
Wellon PQFP112-M402 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Order Code
WL-PQFP80-M402
WL-PQFP80-M402
Wellon PQFP80-M403 Socket Converter
Wellon PQFP80-M403 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Order Code
WL-PQFP80-M403
WL-PQFP80-M403
Wellon PQFP80-M430 Socket Converter
Wellon PQFP112-M430 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Order Code
WL-PQFP80-M430
WL-PQFP80-M430
Wellon PQFP80-M431 Socket Converter
Wellon PQFP80-M431 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Order Code
WL-PQFP80-M431
WL-PQFP80-M431
Wellon PQFP80-M432 Socket Converter
Wellon PQFP80-M432 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Order Code
WL-PQFP80-M432
WL-PQFP80-M432
Wellon PQFP80-M436 Socket Converter
Wellon PQFP112-M436 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Order Code
WL-PQFP80-M436
WL-PQFP80-M436
Wellon PQFP80-M459 Socket Converter
Wellon PQFP112-M459 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP112 package.
Order Code
WL-PQFP80-M459
WL-PQFP80-M459
Wellon PQFP80-M460 Socket Converter
Wellon PQFP80-M460 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Socket converter for some Freescale and Motorola microcontrollers in PQFP80 package.
Order Code
WL-PQFP80-M460
WL-PQFP80-M460
Wellon QFP44 Socket Adapter
Wellon QFP44 Socket Adapter
This adapter uses a QFP44 (0.8mm pitch 11x11) (OTQ-44-0.8-04) socket.
Its sizing is (0.8mm pitch 11x11 12m x 12mm package).
It is for ATxmega devices, Freescale MC56F824x, MCF51, PIC...
This adapter uses a QFP44 (0.8mm pitch 11x11) (OTQ-44-0.8-04) socket.
Its sizing is (0.8mm pitch 11x11 12m x 12mm package).
It is for ATxmega devices, Freescale MC56F824x, MCF51, PIC...
Order Code
WL-QFP44-U002
WL-QFP44-U002
Wellon QFP44 Socket adapter
Wellon QFP44 Socket Adapter 13.2mm
This socket is not for standard TQFP chips, which have 12mm leg span but for MQFP chips with 13.2mm leg span. Both package types have 10mm body but MQFP (aka PQFP) have longer legs and are 2mm thick...
This socket is not for standard TQFP chips, which have 12mm leg span but for MQFP chips with 13.2mm leg span. Both package types have 10mm body but MQFP (aka PQFP) have longer legs and are 2mm thick...
Order Code
WL-QFP44-U012
WL-QFP44-U012
Wellon QFP64-M234 Socket Converter
Wellon QFP64-M234 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in QFP64 package
Socket converter for some Freescale and Motorola microcontrollers in QFP64 package
Order Code
WL-QFP64-M234
WL-QFP64-M234
Wellon QFP64-M256 Socket Converter
Wellon QFP64-M256 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in QFP64 package
Socket converter for some Freescale and Motorola microcontrollers in QFP64 package
Order Code
WL-QFP64-M256
WL-QFP64-M256
Wellon Socket Adapter for TSOP48 Packages
TSOP48 Universal socket adapter
Converts from DIL ZIF socket to devices in TSOP48 (0.5mm pitch 20mm width) (IC191-0482-004)
Can be used...
Converts from DIL ZIF socket to devices in TSOP48 (0.5mm pitch 20mm width) (IC191-0482-004)
Can be used...
Order Code
WL-TSOP48-U2
WL-TSOP48-U2
Wellon TQFP144-M433 Socket Converter
Wellon TQFP144-M433 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in TQFP144 package.
Socket converter for some Freescale and Motorola microcontrollers in TQFP144 package.
Order Code
WL-TQFP144-M433
WL-TQFP144-M433
Wellon TQFP144-M435 Socket Converter
Wellon TQFP144-M435 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in TQFP144 package.
Socket converter for some Freescale and Motorola microcontrollers in TQFP144 package.
Order Code
WL-TQFP144-M435
WL-TQFP144-M435
Wellon Universal Programmer PLCC20 Socket Adapter
PLCC20 Universal socket adapter
Converts from DIL ZIF socket toPLCC20 (1.27mm pitch 4x5)(IC120-0204-205)
Can be used with ALL Wellon and other programmers
Converts from DIL ZIF socket toPLCC20 (1.27mm pitch 4x5)(IC120-0204-205)
Can be used with ALL Wellon and other programmers
Order Code
WL-PL20-U1
WL-PL20-U1
Wellon Universal Programmer PLCC28 Socket Adapter
PLCC28 socket adapter for Wellon Programmers
Converts from DIL ZIF socket to PLCC28 (1.27mm pitch )(IC120-0284-308) Can be used with Wellon and other programmers.
For PLDs and other devices in 28-pin PLCC ...
Converts from DIL ZIF socket to PLCC28 (1.27mm pitch )(IC120-0284-308) Can be used with Wellon and other programmers.
For PLDs and other devices in 28-pin PLCC ...
Order Code
WL-PL28-U1
WL-PL28-U1
Wellon Universal Programmer PLCC32 Socket Adapter
PLCC32 Universal socket adapter
Converts from DIL ZIF socket toPLCC32(1.27mm pitch 7x9)(IC120-0324-309) Can be used with Wellon and other programmers, and for devices such as 272829C010-080.....
Converts from DIL ZIF socket toPLCC32(1.27mm pitch 7x9)(IC120-0324-309) Can be used with Wellon and other programmers, and for devices such as 272829C010-080.....
Order Code
WL-PL32-U1
WL-PL32-U1
Wellon Universal Programmer PLCC44 Socket Adapter
Wellon PLCC44 Socket Adapter
For 44-pin devices in PLCC packages, and for programmers with 48-pin ZIF socket.
For 44-pin devices in PLCC packages, and for programmers with 48-pin ZIF socket.
Order Code
WL-PL44-U1
WL-PL44-U1
Wellon Universal Programmer PLCC44 Socket Adapter
Wellon PLCC44 Socket Adapter
For 44-pin devices in PLCC packages, wired to 40-pin DIP outline.
For 44-pin devices in PLCC packages, wired to 40-pin DIP outline.
Order Code
WL-PL44-P4
WL-PL44-P4
Wellon Universal Programmer SOIC28 Socket Adapter
SOIC28 Universal socket adapter
Converts from DIL ZIF socket toSOIC28 (1.27mm pitch 10.3mm width)(OTS-28-1.27-04). Can be used with Wellon and other programmers, and for devices such as PLDs, Cypress microcontrollers and other...
Converts from DIL ZIF socket toSOIC28 (1.27mm pitch 10.3mm width)(OTS-28-1.27-04). Can be used with Wellon and other programmers, and for devices such as PLDs, Cypress microcontrollers and other...
Order Code
WL-SOIC28-U1
WL-SOIC28-U1
Wellon Universal Programmer SOP16 Socket Adapter
SOP16 Universal socket adapter
Converts from DIL ZIF socket to SOP16 (1.27mm pitch 6mm width), also replaces WL-SOP8-U1 for 8-pin devices. Can be used with Wellon and other programmers...
Converts from DIL ZIF socket to SOP16 (1.27mm pitch 6mm width), also replaces WL-SOP8-U1 for 8-pin devices. Can be used with Wellon and other programmers...
Order Code
WL-SOP16-U1
WL-SOP16-U1
Wellon Universal Programmer SOP20 Socket Adapter
SOP20 Universal socket adapter
Converts from DIL ZIF socket to SOP20 (1.27mm pitch 7.8mm width)(OTS-20-1.27-01) Can be used with Wellon and other programmers, and for devices with 8 to 20 pins.
Converts from DIL ZIF socket to SOP20 (1.27mm pitch 7.8mm width)(OTS-20-1.27-01) Can be used with Wellon and other programmers, and for devices with 8 to 20 pins.
Order Code
WL-SOP20-U1
WL-SOP20-U1
Wellon Universal Programmer SOP28 Socket Adapter
Wellon SOP28 Socket Adapter
For 28-pin devices in SOP packages.
SOP28 (1.27mm pitch 12.1mm width) (OTS-28-1.27-23)
For 28-pin devices in SOP packages.
SOP28 (1.27mm pitch 12.1mm width) (OTS-28-1.27-23)
Order Code
WL-SOP28-U1
WL-SOP28-U1
Wellon Universal Programmer SOP40 Socket Adapter
SOP40 socket adapter for Wellon Programmers
Converts from DIL ZIF socket to SOP40 (1.27mm pitch 14.2mm width)(OTS-40-1.27-01). Can be used with Wellon and other programmers.
Converts from DIL ZIF socket to SOP40 (1.27mm pitch 14.2mm width)(OTS-40-1.27-01). Can be used with Wellon and other programmers.
Order Code
WL-SOP40-U1
WL-SOP40-U1
Wellon Universal Programmer SOP44 Socket Adapter
SOP44 socket adapter for Wellon Programmers
Converts from DIL ZIF socket to SOP44 (1.27mm pitch 15.9mm width) (IC51-0442-1208) Can be used with Wellon and other programmers.
For SOP44...
Converts from DIL ZIF socket to SOP44 (1.27mm pitch 15.9mm width) (IC51-0442-1208) Can be used with Wellon and other programmers.
For SOP44...
Order Code
WL-SOP44-U1
WL-SOP44-U1
Wellon Universal Programmer SOT6 Socket Adapter
SOP6 PIC10F socket adapter
Converts from DIL ZIF socket toSOP6 (0.95mm pitch 2.8mm width)(499-P44-10) Can be used with Wellon and other programmers, for PIC10Fxxx devices.
Converts from DIL ZIF socket toSOP6 (0.95mm pitch 2.8mm width)(499-P44-10) Can be used with Wellon and other programmers, for PIC10Fxxx devices.
Order Code
WL-SOT6-U1
WL-SOT6-U1
Wellon Universal Programmer SSOP28 Socket Adapter
SSOP28 Universal socket adapter
Converts from DIL ZIF socket to SSOP28 (0.65mm pitch 6.4mm width)(IC51-0202-779) Can be used with Wellon and other programmers, and for devices in 8 to 28-pin SSOP packages.
Converts from DIL ZIF socket to SSOP28 (0.65mm pitch 6.4mm width)(IC51-0202-779) Can be used with Wellon and other programmers, and for devices in 8 to 28-pin SSOP packages.
Order Code
WL-SSOP28-U1
WL-SSOP28-U1
Wellon Universal Programmer SSOP34 Socket Adapter
Wellon SSOP34 socket adapter
Converts from DIL ZIF socket toSSOP34 (0.65mm pitch 7*8mm width)(OTS-34-065-01).
Can be used with Wellon ...
Converts from DIL ZIF socket toSSOP34 (0.65mm pitch 7*8mm width)(OTS-34-065-01).
Can be used with Wellon ...
Order Code
WL-SSOP34-U1
WL-SSOP34-U1
Wellon Universal Programmer STM TSOP28 Socket Adapter
TSOP28 Universal socket adapter
Converts from DIL ZIF socket to ST Microelectronics devices (formerly SGS Thomson), in TSOP28 (0.55mm pitch 13.7mm width)(OTS-28-0.55-03)...
Converts from DIL ZIF socket to ST Microelectronics devices (formerly SGS Thomson), in TSOP28 (0.55mm pitch 13.7mm width)(OTS-28-0.55-03)...
Order Code
WL-TSOP28-U1
WL-TSOP28-U1
Wellon Universal Programmer TQFP44 Socket Adapter
TQFP44 Universal socket adapter
Converts from DIL ZIF socket to QFP44 (0.8mm pitch 11x11 (12mmx12mm)~(13.2mmx13.2mm))(IC51-0444-467) Can be used with Wellon and other programmers, and for devices such as ST, Atmel and Temic microcontroll
Converts from DIL ZIF socket to QFP44 (0.8mm pitch 11x11 (12mmx12mm)~(13.2mmx13.2mm))(IC51-0444-467) Can be used with Wellon and other programmers, and for devices such as ST, Atmel and Temic microcontroll
Order Code
WL-TQFP44-U001
WL-TQFP44-U001
Wellon Universal Programmer TQFP64 Socket Adapter
0.8mm pitch TQFP64 socket adapter for Atmel AVR
Converts from DIL ZIF socket toTQFP64 (0.8mm pitch 16x16)(OTQ-80-0.8-03) Can be used with Wellon programmers, and for devices such Atmel ATmega AVR devices...
Converts from DIL ZIF socket toTQFP64 (0.8mm pitch 16x16)(OTQ-80-0.8-03) Can be used with Wellon programmers, and for devices such Atmel ATmega AVR devices...
Order Code
WL-TQFP64-103
WL-TQFP64-103
Wellon Universal Programmer TSOP28 Socket Adapter
TSOP28 Universal socket adapter
Converts from DIL ZIF socket toTSOP28 (0.55mm pitch 13.7mm width)(OTS-28-0.55-03)
Can be used with Wellon and other programmers, and for devices in 28-pin TSOP packages...
Converts from DIL ZIF socket toTSOP28 (0.55mm pitch 13.7mm width)(OTS-28-0.55-03)
Can be used with Wellon and other programmers, and for devices in 28-pin TSOP packages...
Order Code
WL-TSOP28-T
WL-TSOP28-T
Wellon Universal Programmer TSOP32 Socket Adapter
TSOP32 Universal socket adapter
Converts from DIL ZIF socket to devices in TSOP32 (0.5mm pitch 14mm width)(OTS-32-0.6-01. Can be used with Wellon and other programmers...
Converts from DIL ZIF socket to devices in TSOP32 (0.5mm pitch 14mm width)(OTS-32-0.6-01. Can be used with Wellon and other programmers...
Order Code
WL-TSOP32-U2
WL-TSOP32-U2
Wellon Universal Programmer TSOP48 Socket Adapter
TSOP48 Universal socket adapter
Converts from DIL ZIF socket to devices in TSOP48 (0.5mm pitch 20mm width) (IC191-0482-004)
Can be used with Wellon ...
Converts from DIL ZIF socket to devices in TSOP48 (0.5mm pitch 20mm width) (IC191-0482-004)
Can be used with Wellon ...
Order Code
WL-TSOP48-U1
WL-TSOP48-U1
Wellon VP-299 Universal Programmer
VP-299 Universal Programmer with 40-pin ZIF Socket
This universal programmer is for a range of devices, including most EEPROMs, EEPROMs, some PIC microcontrollers, AVR and other microcontrollers like AT89, plus PLDs and flash memory...
This universal programmer is for a range of devices, including most EEPROMs, EEPROMs, some PIC microcontrollers, AVR and other microcontrollers like AT89, plus PLDs and flash memory...
Order Code
VP-299
VP-299
Wellon VP-398S 48 Pin Programmer
VP-398 USB 48-pin Memory Programmer ZIF Socket
This is our lowest cost 48-pin Memory Programmer. The Wellon VP-398 is for all serial EEPROM and EPROM...
This is our lowest cost 48-pin Memory Programmer. The Wellon VP-398 is for all serial EEPROM and EPROM...
Order Code
VP-398S
VP-398S
Wellon VP-798 Universal Programmer
VP-798 USB Universal Programmer with 48-pin ZIF Socket
The VP-798 programmer supports 36,000 devices, including lots of memory chips, AVR and other microcontrollers like AT89, dsPIC and all PIC microcontrollers, EEPROMs, plus PLDs and
Order Code
VP-798
VP-798
Wellon VP-998 Universal Programmer
VP-998 Universal Programmer with 48-pin ZIF Socket
The VP-998 is the latest top of the range Wellon Universal Programmer, with support for over 97,000 devices, including PIC microcontrollers, EEPROMs, dsPIC, AVR...
The VP-998 is the latest top of the range Wellon Universal Programmer, with support for over 97,000 devices, including PIC microcontrollers, EEPROMs, dsPIC, AVR...
Order Code
VP-998
VP-998
Wellon WL-PL28-M370 Socket Converter
Wellon WL-PL28-M370 Socket Converter
Socket converter for some Texas Instruments (TI) microcontrollers in PLCC28 package.
Socket converter for some Texas Instruments (TI) microcontrollers in PLCC28 package.
Order Code
WL-PL28-M370
WL-PL28-M370
Wellon WL-PL44-M370 Socket Converter
Wellon WL-PL44-M370 Socket Converter
Socket converter for some Texas Instruments microcontrollers in PLCC44 package.
Socket converter for some Texas Instruments microcontrollers in PLCC44 package.
Order Code
WL-PL44-M370
WL-PL44-M370
Wellon WL-PL52-M253 Socket Converter
Wellon WL-PL52-M253 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PLCC52 package.
Socket converter for some Freescale and Motorola microcontrollers in PLCC52 package.
Order Code
WL-PL52-M253
WL-PL52-M253
Wellon WL-PL52-M257 Socket Converter
Wellon WL-PL52-M257 Socket Converter
Socket converter for some Freescale and Motorola microcontrollers in PLCC52 package.
Socket converter for some Freescale and Motorola microcontrollers in PLCC52 package.
Order Code
WL-PL52-M257
WL-PL52-M257
WL-EBGA64-E145-2 Adapter
Wellon 64-pin BGA adapter
Wellon WL-EBGA64-E145-2 64-pin BGA adapter for Wellon universal programmers.
This adapter is 1.0mm pitch 8x8 for chips that are 10mm×15mm.
Wellon WL-EBGA64-E145-2 64-pin BGA adapter for Wellon universal programmers.
This adapter is 1.0mm pitch 8x8 for chips that are 10mm×15mm.
Order Code
WL-EBGA64-E145-2
WL-EBGA64-E145-2
WL-QFP64-M217 Socket Adapter
Wellon QFP64-M217 Socket Converter
Socket converter for Atmel (Microchip) AVR microcontrollers in QFP64 package. Includes ATmega64, ATmega128, ATmega2561,ATmega1281 and other 64-pin TQFP AVR microcontrollers...
Order Code
WL-QFP64-M217
WL-QFP64-M217