Pack of 5 256KB Keyfob AVR ISP and UPDIprogrammer
AVR ISP and AVR UPDI Programmer
A pack of 5 completely portable programmers for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory. These programmers come in a key fob case and have one button operation to eliminate operator errors. Removes the need for a PC on the production line or in the field.
Once the programmer is loaded, just keep plugging it into your target boards and program/verify Flash and EEPROM with a single button press.
Features
- Minature AVR handheld ISP programmer, battery powered
- Single button operation
- Dimensions: Metric- 45mm x 35mm x 15mm - 28g
- Dimensions: Imperial - 1.8 x 1.4 x 0.5 inches - 1 oz
- Easy to load, easy to use
- Reprogram as many times as you need
- Holds program code indefinitely
- Loaded from PC using USB dongle
- Programs targets down to 3.3V
- No battery required
- 10-way ISP lead
- 6-way adapters included for ISP and UPDI
- AVR ISP and AVR UPDI Programmer
Compare new V3 Version with older 64KB Keyfob V1 version
- 256 KB instead of 64 KB memory
- Supports UPDI interface as well as ISP
- Requires software v8.3.0 up - this also supports V1 keyfob
- Uses same Kanda USB dongle as old keyfobs and handheld
- No battery fitted or needed with V3
- Yellow button rather than red for easy identification
- V3 keyfob can't be loaded using PRG files created from older V1 units
- V3 includes 5 10DIL6 adapters for ISP and UPDI
AVR Microcontroller Support
- Older AVR: AT90S1200, AT90S2313, AT90S2323, AT990S2333, AT90S2343
- AT90S4414, AT90S4433, AT90S8515,AT90S8535, ATmega103
- AT90CAN128, AT90CAN32, AT90CAN64
- AT90PWM2/3
- AT90USB1286, AT90USB646
- ATmega128, ATmega1280, ATmega1281, ATmega128RFA1
- ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega168, ATmega169
- ATmega16M1, ATmega16U2, ATmega16U4
- ATmega32, ATmega323, ATmega324, ATmega325, ATmega3250, ATmega328, ATmega329
- ATmega3290, ATmega32C1, ATmega32M1, ATmega32U2, ATmega32U4, ATmega32U6
- ATmega48, ATmega64, ATmega640, ATmega644, ATmega645, ATmega6450, ATmega649
- ATmega6490, ATmega64C1, ATmega64M1
- ATmega8, ATmega8515, ATmega8535, ATmega88, ATmega8U2
- ATtiny13, ATtiny15, ATtiny1634, ATtiny167
- ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny261
- ATtiny4313, ATtiny43U, ATtiny44, ATtiny45, ATtiny461, ATtiny48
- ATtiny84, ATtiny85, ATtiny861, ATtiny87, ATtiny88
- ATtiny441, ATtiny841
- ATmega2560, ATmega2561
- All P (PicoPower),PA, V, L and A AVR microcontrollers are supported, only down to
3.3V.
AVR Microcontroller Support - UPDI
AVR ATtiny UPDI Support
- ATtiny202, ATtiny402, ATtiny204, ATtiny404, ATtiny804, ATtiny1604
- ATtiny406, ATtiny806, ATtiny1606, ATtiny807, ATtiny1607
- ATtiny212, ATtiny412, ATtiny214, ATtiny414, ATtiny814, ATtiny1614
- ATtiny416, ATtiny816, ATtiny1616, ATtiny3216
- ATtiny417, ATtiny817, ATtiny1617, ATtiny3217
- ATtiny424, ATtiny426, ATtiny427
- ATtiny824, ATtiny826, ATtiny827
- ATtiny1624, ATtiny1626, ATtiny1627
- ATtiny3224, ATtiny3226, ATtiny3227
ATmega UPDI Support
- ATmega808, ATmega1608, ATmega3208, ATmega4808
- ATmega809, ATmega1609, ATmega3209, ATmega4809
AVR D Series UPDI Support
- AVR128DA28, AVR128DA32, AVR128DA48, AVR128DA64
- AVR32DA28, AVR32DA32, AVR32DA48
- AVR64DA28, AVR64DA32, AVR64DA48, AVR64DA64
- AVR128DB28, AVR128DB32, AVR128DB48, AVR128DB64
- AVR64DB28, AVR64DB32, AVR64DB48, AVR64DB64
- AVR32DB28, AVR32DB32, AVR32DB48
- AVR16DD14, AVR16DD20, AVR16DD28, AVR16DD32
- AVR32DD14, AVR32DD20, AVR32DD28, AVR32DD32
- AVR64DD14, AVR64DD20, AVR64DD28, AVR64DD32
- AVR64EA28, AVR64EA32, AVR64EA48
- AVR16EB14, AVR16EB20,AVR16EB28, AVR16EB32
New devices will be supported as they are released
For support down to 1.8V, JTAG, PDI (ATxmega) and TPI interfaces plus extra features like
serial numbering and usage limit, see
Handheld Programmer
Important Note
You will need a USB Starter Kit to load these programmers. One USB Starter Kit will allow you to load as many USB Keyfob Mini-programmers as you want. This USB Keyfob can NOT be used with parallel port loader. The Starter kit comes complete with a USB Keyfob Mini-programmer.
Starter Kit
You can also buy the USB Starter Kit with 6 Keyfob Mini-programmers.
256KB Keyfob Field Service Pack
AVR Handheld Programmer
The keyfob is NOT designed to cope with faulty target boards, so you should test or isolate target boards first, or use the handheld programmer instead.
A more robust Handheld programmer is available, which is ideal for use on the production line. It operates in the same way as the keyfob but has extra features for production use and 128Kb memory. This programmer is ideal for adding Boot Block code to ATmega128 devices.
Handheld AVR Programmer
6-Way adapters
We now have adapters to convert from the standard Kanda 10-way header to different 6-way headers.
6-Way DIL adapter - 5 included
6 x 1-way leads
6-Way Micromatch connector
See
Guide to AVR ISP Circuits for schematics of recommended AVR ISP circuits (new window).
See
Overview of Kanda AVR Programmer Range
No Battery Requirement
The AVR target must be powered, which also powers keyfob. For programming un-powered target, you need Handheld Programmer.
When loading from PC, Dongle2 (introduced 2013) or Dongle3 will power the keyfob. If you have original Dongle (see label), you will need to purchase Dongle3 - see Product Accessories below.