ARM Cortex Header 2.0mm
ARM Cortex M0 SWD Header, 2 mm pitch
Adapter to convert SAM D handheld programmer output to Cortex M0 SWD Debug header layout. This adapter is 2 mm pitch...
ASIX Forte PIC Programmer
Forte PIC Programmer
High speed USB In-Circuit Serial programmer from Asix that supports all PIC microcontrollers, including dsPIC. If you need fast programming, then this is the best choice. It includes variable programming voltage (VPP) to
AT17 Programming Board
AT17 Programming Board
Programming board with sockets for AT17 FPGA configurators in 20-pin PLCC and 8-pin SOIC packages. The EEISP-U ISP programmer connects to the header on the board making this a socket programmer...
Atmel ICE Cables
Cable Adapter for ATATMEL-ICE Programmer and Debugger
0.1" (2.54mm) adapter kit for AVR 6-pin and 10-pin ISP, TPI and DebugWire plus 10-pin JTAG interfaces. Connects to Atmel ICE 1.27mm AVR output connector...
Order Code
ATATMEL-ICE-ADAPTER
AVR 10-way to 6 Flying lead adapter
AVR 10-Way to 6 Flying lead Adapter
This product is setup for AVR microcontrollers and Serial EEPROMs and there is a different version for PIC microcontrollers.
An adapter for standard Kanda 10-way programmer output to a 6...
AVR 256KB Keyfob Programmer Field Service Pack
Field Service Pack for 256K AVR USB Keyfob programmer
AVR ISP and AVR UPDI Programmer.
A Pack of 6 portable 256KB USB keyfob mini-programmers for In System Programming of AVR microcontrollers plus a USB PC Interface and software ...
AVR 256KB Keyfob programmers 5 Pack
Pack of 5 256KB Keyfob AVR programmer
Supports ISP and UPDI interfaces.
A pack of 5 completely portable programmers for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory...
AVR and ATxmega 8-way Handheld V3 Kit
8-way ATxmega, UPDI and AVR Handheld Programmer
Standalone programmer with 4MB of memory (512KB per slot) plus USB PC interface and software. Load the programmer from a PC using the USB PC interface and the Software and then you do not n
AVR and ATxmega Handheld V3
AVR and XMEGA Handheld Programmer
Version 3 AVR Handheld standalone Programmer with single button operation, supports all programming interfaces and AVR D series microcontrollers...
AVR and ATxmega Handheld V3 Starter Kit
AVR and XMEGA V3 Handheld Programmer Kit
Version 3 AVR Standalone Programmer. Supports all AVR and ATxmega Microcontrollers including ISP, JTAG, UPDI, TPI and PDI. New power options, faster speed, AVR D series support...
AVR ICE PCBA with Adapters
ATATMEL-ICE-PCBA AVR ICE Debugger with Adapters included
It has all the function of expensive boxed versions but is much cheaper. and Kanda have included an adapter board with this version to convert to 6 and 10-way ISP and 10-way JTAG..
AVR ISP 1.27mm
Atmel AVR ISP 1.27mm adapter
Adapter to convert standard 2.54mm (0.1") AVR ISP output to 1.27mm (0.05") pitch. This adapter uses standard 10-way ISP target layout.
AVR ISP 2.0mm Adapter
AVR ISP 2.0mm Adapter
Adapter to convert standard 10-way Atmel AVR ISP from 2.54mm (0.1") pitch to 2.0mm pitch.
AVR JTAG 1.27mm Adapter
Atmel AVR JTAG Adapter 1.27mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 1.27mm (0.05") pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
AVR JTAG Adapter 2.0mm
AVR JTAG Adapter - 2.0mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 2.0mm pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
AVR JTAG ICE II Emulator
AVR JTAG ICE Emulator for all AVR microntrollers
New AVR Emulator that is compatible with Atmel's AVR JTAGICE MkII, Type B. Like AVR JTAGICE MkII, it interfaces with Atmel Studio development environment and AVRDude programming...
AVR UPDI Programmer
Atmel AVR UPDI Programmer
Kanda's latest USB AVR programmer supports AVR ISP, TPI, UPDI and JTAG programming interfaces. It is fast and reliable with Kanda's popular software interface to make your device programming as efficient as...
AVRUPDI 12V Generator
12V Generator Module for AVRUPDI Programmer
This module can be fitted to AVRUPDI programmer to give 12V entry for TPI and UPDI interfaces...