Search Site
Selected Manufacturer: Kanda
Below are the products which we stock from Kanda.
6-way AVR ISP Adapter
10 to 6-way AVR ISP with crimp housing
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP...
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP...
Order Code
10AVR6
10AVR6
Price: $15.00
6-way ISP for ASIC 21225
10 to 6-way AVR ISP Reversed
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP. For ASIC-21225 charger and rear of PCB...
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP. For ASIC-21225 charger and rear of PCB...
Order Code
10AVR6-R
10AVR6-R
Price: $15.00
10-way to 6-way DIL Adapter
10-Way to 6-Way DIL Programmer Adapter
An adapter or convertor from standard Kanda 10-way programmer output to a AVR ISP 6-way DIL programming format. The 6-Way header is ...
An adapter or convertor from standard Kanda 10-way programmer output to a AVR ISP 6-way DIL programming format. The 6-Way header is ...
Order Code
10DIL6
10DIL6
Price: $10.00
PIC 10-way to 6 Flying lead adapter
PIC 10-Way to 6 Flying lead Adapter
This version is for Kanda PIC programmers and there is a different version for AVR and EEPROM.
An adapter for standard Kanda 10-way programmer output to a 6 by 1-way format. The 6 flying...
This version is for Kanda PIC programmers and there is a different version for AVR and EEPROM.
An adapter for standard Kanda 10-way programmer output to a 6 by 1-way format. The 6 flying...
Order Code
10FLEX6
10FLEX6
Price: $12.00
AVR 10-way to 6 Flying lead adapter
AVR 10-Way to 6 Flying lead Adapter
This product is setup for AVR microcontrollers and Serial EEPROMs and there is a different version for PIC microcontrollers.
An adapter for standard Kanda 10-way programmer output to a 6...
This product is setup for AVR microcontrollers and Serial EEPROMs and there is a different version for PIC microcontrollers.
An adapter for standard Kanda 10-way programmer output to a 6...
Order Code
10FLEX6-A
10FLEX6-A
Price: $12.00
AVR ISP 1.27mm
Atmel AVR ISP 1.27mm adapter
Adapter to convert standard 2.54mm (0.1") AVR ISP output to 1.27mm (0.05") pitch. This adapter uses standard 10-way ISP target layout.
Adapter to convert standard 2.54mm (0.1") AVR ISP output to 1.27mm (0.05") pitch. This adapter uses standard 10-way ISP target layout.
Order Code
10ISP1-27
10ISP1-27
Price: $17.00
AVR ISP 2.0mm Adapter
AVR ISP 2.0mm Adapter
Adapter to convert standard 10-way Atmel AVR ISP from 2.54mm (0.1") pitch to 2.0mm pitch.
Adapter to convert standard 10-way Atmel AVR ISP from 2.54mm (0.1") pitch to 2.0mm pitch.
Order Code
10ISP2-0
10ISP2-0
Price: $17.00
AVR JTAG 1.27mm Adapter
Atmel AVR JTAG Adapter 1.27mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 1.27mm (0.05") pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
Adapter to convert normal 10-way Atmel AVR JTAG connector to 1.27mm (0.05") pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
Order Code
10JTAG1-27
10JTAG1-27
Price: $17.00
AVR JTAG Adapter 2.0mm
AVR JTAG Adapter - 2.0mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 2.0mm pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.Order Code
10JTAG2-0
10JTAG2-0
Price: $17.00
10-way to 6-way Micromatch adapter
10-Way to 6-Way Micromatch Adapter
An adapter or convertor from standard Kanda 10-way programmer output to a 6-way Micromatch format for AVR ISP. The ...
An adapter or convertor from standard Kanda 10-way programmer output to a 6-way Micromatch format for AVR ISP. The ...
Order Code
10MICR6
10MICR6
Price: $13.00
6-way PDI Adapter
10-Way to 6-way PDI Adapter
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2 format for ATxmega PDI targets.
The pins available are VCC, GND plus PDI-CLOCK and PDI-DATA, using Atmel...
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2 format for ATxmega PDI targets.
The pins available are VCC, GND plus PDI-CLOCK and PDI-DATA, using Atmel...
Order Code
10PDI6
10PDI6
Price: $15.00
10-way to RJ11 Adapter
10-way to RJ11 Adapter
Adapter for converting target interface of PIC hand held and keyfob programmers into an RJ11 connection. This connection type is used by Microchip ICD2.
Adapter for converting target interface of PIC hand held and keyfob programmers into an RJ11 connection. This connection type is used by Microchip ICD2.
Order Code
10RJ11
10RJ11
Price: $12.00
10-5 way SIL Adapter
10 to 5-way SIL adapter for PIC programmers
Adapter for end of the 10-way programming lead that converts to 5-way SIL (Single In Line) connector. The pin-out of this 5-way SIL matches PICkit3 output.
Adapter for end of the 10-way programming lead that converts to 5-way SIL (Single In Line) connector. The pin-out of this 5-way SIL matches PICkit3 output.
Order Code
10SIL5
10SIL5
Price: $12.00
10-6way SIL Adapter
10 to 6-way SIL adapter for PIC programmers
Adapter for end of the 10-way programming lead that converts to 6-way SIL (Single In Line) connector. The pin-out of this 6-way SIL matches PICkit output.
Adapter for end of the 10-way programming lead that converts to 6-way SIL (Single In Line) connector. The pin-out of this 6-way SIL matches PICkit output.
Order Code
10SIL6
10SIL6
Price: $9.00
SWD Adapter 1.27mm
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 1.27mm or 0.05 inch pitch...
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 1.27mm or 0.05 inch pitch...
Order Code
10SWD1-27
10SWD1-27
Price: $17.00
ARM Cortex Header 2.0mm
ARM Cortex M0 SWD Header, 2 mm pitch
Adapter to convert SAM D handheld programmer output to Cortex M0 SWD Debug header layout. This adapter is 2 mm pitch...Order Code
10SWD2-0
10SWD2-0
Price: $16.00
SWD Adapter 2.54mm
ARM Cortex M0 SWD Header, 0.1 inch or 2.54mm pitch
Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 2.54mm or 0.1 inch pitch...
Order Code
10SWD2-54
10SWD2-54
Price: $10.00
AVRUPDI 12V Generator
12V Generator Module for AVRUPDI Programmer
This module can be fitted to AVRUPDI programmer to give 12V entry for TPI and UPDI interfaces...
This module can be fitted to AVRUPDI programmer to give 12V entry for TPI and UPDI interfaces...
Order Code
12V-GEN
12V-GEN
Price: $15.00
Atmel ICE Cables
Cable Adapter for ATATMEL-ICE Programmer and Debugger
0.1" (2.54mm) adapter kit for AVR 6-pin and 10-pin ISP, TPI and DebugWire plus 10-pin JTAG interfaces. Connects to Atmel ICE 1.27mm AVR output connector...
0.1" (2.54mm) adapter kit for AVR 6-pin and 10-pin ISP, TPI and DebugWire plus 10-pin JTAG interfaces. Connects to Atmel ICE 1.27mm AVR output connector...
Order Code
ATATMEL-ICE-ADAPTER
ATATMEL-ICE-ADAPTER
Price: $14.50
JTAG Adapter for AVR Handheld Programmer
JTAG Adapter for AVR Handheld Programmer
This adapter lets you use the JTAG programming algorithm with the Kanda AVR or AVR/ATxmega USB Handheld programmer, with software version v1.2.5 on.
This adapter lets you use the JTAG programming algorithm with the Kanda AVR or AVR/ATxmega USB Handheld programmer, with software version v1.2.5 on.
Order Code
AVRHHP-JTAG
AVRHHP-JTAG
Price: $12.00
USB AVR ISP In System Programmer
Low cost USB port AVR ISP
The low cost AVRISP-U has its own software or can be run from Studio. It can power target and now has stronger drive to program difficult ISP circuits...
The low cost AVRISP-U has its own software or can be run from Studio. It can power target and now has stronger drive to program difficult ISP circuits...
Order Code
AVRISP-U
AVRISP-U
Price: $39.00
AVR UPDI Programmer
Atmel AVR UPDI Programmer
Kanda's latest USB AVR programmer supports AVR ISP, TPI, UPDI and JTAG programming interfaces. It is fast and reliable with Kanda's popular software interface to make your device programming as efficient as...
Kanda's latest USB AVR programmer supports AVR ISP, TPI, UPDI and JTAG programming interfaces. It is fast and reliable with Kanda's popular software interface to make your device programming as efficient as...
Order Code
AVRUPDI
AVRUPDI
Price: $95.00
0.3 Metre 10-way ISP lead
0.3 Metre 10-way ISP lead
0.3 metre (12 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP and handheld programmers.
0.3 metre (12 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP and handheld programmers.
Order Code
CR10W0-3M
CR10W0-3M
Price: $7.50
0.5 Metre 10-way ISP lead
0.5 Metre 10-way ISP lead
0.5 metre (19 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP and handheld programmers.
0.5 metre (19 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP and handheld programmers.
Order Code
CR10W0-5M
CR10W0-5M
Price: $8.50
Customer Connectors, adapters and add-ons
Customer Connectors, Adapters and Add-ons
QUSB2SK with No QUSB2 Module fitted
Main board with FPGA but no QUSB2 module.
QUSB2SK with No QUSB2 Module fitted
Main board with FPGA but no QUSB2 module.
Order Code
CUSTOM
CUSTOM
Price: $396.00
USB Dongle3 for Handheld Programmer
USB Interface for Handheld Programmers
USB PC interface for all Handheld Programmers, Portable Programmer and AVR Keyfob programmers(Dongle3).
USB PC interface for all Handheld Programmers, Portable Programmer and AVR Keyfob programmers(Dongle3).
Order Code
DONGLE3
DONGLE3
Price: $30.00
IC Clips for EEPROM ISP
IC Test Clips for EEISP-U
3M IC test clip set for connecting EEISP-U programmer to devices in circuit. If you want to program or read devices without removing them from a PCB, these clips allow you to do it.
3M IC test clip set for connecting EEISP-U programmer to devices in circuit. If you want to program or read devices without removing them from a PCB, these clips allow you to do it.
Order Code
E2-CLIPS
E2-CLIPS
Price: $69.00
EEPROM Programming Board
Serial EEPROM Programming Board
Simple programming board for in-socket programming of serial EEPROMs with Kanda ISP programmer. Supports 93, 24 and 25 series serial EEPROMs from all manufacturers in 8-pin DIL packages.
Simple programming board for in-socket programming of serial EEPROMs with Kanda ISP programmer. Supports 93, 24 and 25 series serial EEPROMs from all manufacturers in 8-pin DIL packages.
Order Code
EE-BOARD
EE-BOARD
Price: $19.99
AT17 Programming Board
AT17 Programming Board
Programming board with sockets for AT17 FPGA configurators in 20-pin PLCC and 8-pin SOIC packages. The EEISP-U ISP programmer connects to the header on the board making this a socket programmer...
Programming board with sockets for AT17 FPGA configurators in 20-pin PLCC and 8-pin SOIC packages. The EEISP-U ISP programmer connects to the header on the board making this a socket programmer...
Order Code
EE-BOARD-AT17
EE-BOARD-AT17
Price: $49.00
EEPROM ZIF Board
Serial EEPROM Programming Board
Programming board for 24, 25 and 93 series serial EEPROMs, in 8-pin DIP or SOIC packages. Powered by supplied mini-USB lead. Used with EEISP-U...
Programming board for 24, 25 and 93 series serial EEPROMs, in 8-pin DIP or SOIC packages. Powered by supplied mini-USB lead. Used with EEISP-U...
Order Code
EE-BOARD-SMD
EE-BOARD-SMD
Price: $45.00
Serial EEPROM ISP Programmer
USB ISP for Serial EEPROMs and AT17 Configurators
USB In System Programmer - ISP - for 24C, 25C and 93C serial EEPROM devices from any manufacturer and Atmel AT17LVxxx and AT17Fxxx FPGA configurators....
USB In System Programmer - ISP - for 24C, 25C and 93C serial EEPROM devices from any manufacturer and Atmel AT17LVxxx and AT17Fxxx FPGA configurators....
Order Code
EEISP-U
EEISP-U
Price: $99.00
USB Serial EEPROM Handheld Programmer Starter Kit
USB Starter Kit for Serial EEPROM Hand Held Programmer
A very simple to use Hand Held Programmer for Serial EEPROM devices that is loaded from the PC using the USB PC interface and wizard software included in this Starter Kit.
A very simple to use Hand Held Programmer for Serial EEPROM devices that is loaded from the PC using the USB PC interface and wizard software included in this Starter Kit.
Order Code
HH0110EE
HH0110EE
Price: $169.00
AVR and ATxmega Handheld V3 Starter Kit
AVR and XMEGA V3 Handheld Programmer Kit
Version 3 AVR Standalone Programmer. Supports all AVR and ATxmega Microcontrollers including ISP, JTAG, UPDI, TPI and PDI. New power options, faster speed, AVR D series support...
Version 3 AVR Standalone Programmer. Supports all AVR and ATxmega Microcontrollers including ISP, JTAG, UPDI, TPI and PDI. New power options, faster speed, AVR D series support...
Order Code
HH0110V3
HH0110V3
Price: $189.00
USB Handheld Serial EEPROM Programmer
USB Hand Held Programmer for Serial EEPROMs
A very simple to use HandHeld Programmer that is loaded from the PC using the Starter Kit. Once the programmer is loaded with device information and data, then you just plug it into your target
A very simple to use HandHeld Programmer that is loaded from the PC using the Starter Kit. Once the programmer is loaded with device information and data, then you just plug it into your target
Order Code
HH0120EE
HH0120EE
Price: $149.00
AVR and ATxmega Handheld V3
AVR and XMEGA Handheld Programmer
Version 3 AVR Handheld standalone Programmer with single button operation, supports all programming interfaces and AVR D series microcontrollers...
Version 3 AVR Handheld standalone Programmer with single button operation, supports all programming interfaces and AVR D series microcontrollers...
Order Code
HH0120V3
HH0120V3
Price: $179.00
8-way USB AVR Handheld Kit
USB Starter kit for 8-way AVR Handheld Programmer
Now supports JTAG programming as well as normal ISP programming
8-way AVR Handheld Programmer with 2MB of memory plus USB PC interface and software. Not for new users...
Now supports JTAG programming as well as normal ISP programming
8-way AVR Handheld Programmer with 2MB of memory plus USB PC interface and software. Not for new users...
Order Code
HH0810
HH0810
Price: $209.00
8-way ATE AVR Programmer Starter Kit
USB Starter kit for 8-way ATE AVR Programmer
ATE (Automated Test Equipment) version of our popular Kanda 8-way Handheld AVR Programmer with USB PC interface and software. Load the 8-way Handheld AVR Programmer from a PC ...
ATE (Automated Test Equipment) version of our popular Kanda 8-way Handheld AVR Programmer with USB PC interface and software. Load the 8-way Handheld AVR Programmer from a PC ...
Order Code
HH0810ATE
HH0810ATE
Price: $209.00
AVR and ATxmega 8-way Handheld V3 Kit
8-way ATxmega, UPDI and AVR Handheld Programmer
Standalone programmer with 4MB of memory (512KB per slot) plus USB PC interface and software. Load the programmer from a PC using the USB PC interface and the Software and then you do not n
Standalone programmer with 4MB of memory (512KB per slot) plus USB PC interface and software. Load the programmer from a PC using the USB PC interface and the Software and then you do not n
Order Code
HH0810V3
HH0810V3
Price: $229.00
8-way USB AVR Handheld Programmer
8-way Hand Held AVR Programmer for AVR ISP
With TPI and JTAG programming as well as normal serial programming, optional adapter needed.
Version 3 is suggested for new users...
With TPI and JTAG programming as well as normal serial programming, optional adapter needed.
Version 3 is suggested for new users...
Order Code
HH0820
HH0820
Price: $199.00
8-way AVR V3 Handheld
8-way Handheld Programmer Benefits
This 8-way standalone programmer makes it simple to update firmware in ATxmega, AVR D Series and AVR microcontrollers. Select slot needed with a rotary switch, then you plug it in...
This 8-way standalone programmer makes it simple to update firmware in ATxmega, AVR D Series and AVR microcontrollers. Select slot needed with a rotary switch, then you plug it in...
Order Code
HH0820V3
HH0820V3
Price: $199.00
JTAG Adapters
JTAG Adapters for STK200 board
Two adapters to allow JTAG tools to be connected to port pins of STK200 board. These adapters are supplied with JTAGAVR....
Two adapters to allow JTAG tools to be connected to port pins of STK200 board. These adapters are supplied with JTAGAVR....
Order Code
JTAG-AB
JTAG-AB
Price: $9.00
Keyfob Extension Cable
Keyfob Extension Cable
Standard keyfob has 2 inch (50mm) ISP cable. This extension cable provides a 6 inch (150mm) extension if you require more length to reach your connector...
Standard keyfob has 2 inch (50mm) ISP cable. This extension cable provides a 6 inch (150mm) extension if you require more length to reach your connector...
Order Code
KF-EXT
KF-EXT
Price: $11.00
256KB AVR Keyfob Starter Kit
AVR 256KB Keyfob AVR programmer USB Starter Kit
Supports ISP and UPDI
The new 256KB AVR keyfob programmer is a very small standalone programmer for AVR microcontollers with 256KB memory. AVR ISP and AVR UPDI Programmer...
Supports ISP and UPDI
The new 256KB AVR keyfob programmer is a very small standalone programmer for AVR microcontollers with 256KB memory. AVR ISP and AVR UPDI Programmer...
Order Code
KF0010V3
KF0010V3
Price: $99.00
256KB AVR Keyfob
256KB Individual Keyfob Mini-programmer for AVR - USB
Supports ISP and UPDI
A completely portable programmer for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory. This programmer
Supports ISP and UPDI
A completely portable programmer for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory. This programmer
Order Code
KF0020V3
KF0020V3
Price: $79.00
AVR 256KB Keyfob programmers 5 Pack
Pack of 5 256KB Keyfob AVR programmer
Supports ISP and UPDI interfaces. A pack of 5 completely portable programmers for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory...
Supports ISP and UPDI interfaces. A pack of 5 completely portable programmers for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory...
Order Code
KF0030V3
KF0030V3
Price: $339.00
AVR 256KB Keyfob Programmer Field Service Pack
Field Service Pack for 256K AVR USB Keyfob programmer
AVR ISP and AVR UPDI Programmer.
A Pack of 6 portable 256KB USB keyfob mini-programmers for In System Programming of AVR microcontrollers plus a USB PC Interface and software ...
AVR ISP and AVR UPDI Programmer.
A Pack of 6 portable 256KB USB keyfob mini-programmers for In System Programming of AVR microcontrollers plus a USB PC Interface and software ...
Order Code
KF0040V3
KF0040V3
Price: $389.00
PIC Handheld Programmer USB Starter Kit
USB Starter kit for Handheld PIC Programmer
Handheld PIC Programmer with USB PC interface and software. Load the PIC Handheld Programmer from a PC using the USB loader and simple software and then you do not need PC...
Handheld PIC Programmer with USB PC interface and software. Load the PIC Handheld Programmer from a PC using the USB loader and simple software and then you do not need PC...
Order Code
PIC-HH0110
PIC-HH0110
Price: $189.00
USB Handheld PIC Programmer
Handheld Programmer for PIC Microcontrollers
Easy to use, mobile and powerful handheld programmer for field programming, trouble free production...
Easy to use, mobile and powerful handheld programmer for field programming, trouble free production...
Order Code
PIC-HH0120
PIC-HH0120
Price: $179.00
8-way PIC Handheld Programmer Starter Kit
USB Starter kit for 8-way Handheld PIC Programmer
Easy to use portable PIC programmer that holds up to 8 different programs, with single button for target programming and easy slot selection...
Easy to use portable PIC programmer that holds up to 8 different programs, with single button for target programming and easy slot selection...
Order Code
PIC-HH0810
PIC-HH0810
Price: $209.00
8-way ATE PIC Programmer Starter Kit
USB Starter kit for 8-way ATE PIC Programmer
ATE (Automated Test Equipment) version of 8-way Handheld PIC Programmer with USB PC interface and software.It is fitted with ATE interface for standalone operation...
ATE (Automated Test Equipment) version of 8-way Handheld PIC Programmer with USB PC interface and software.It is fitted with ATE interface for standalone operation...
Order Code
PIC-HH081ATE
PIC-HH081ATE
Price: $209.00
USB 8-Way PIC Handheld Programmer
USB 8-Way Handheld PIC Programmer
Multiple program version of the popular Kanda handheld field and production programmer with 2 MB of memory. Just load the programmer...
Multiple program version of the popular Kanda handheld field and production programmer with 2 MB of memory. Just load the programmer...
Order Code
PIC-HH0820
PIC-HH0820
Price: $199.00
PIC ICSP to RJ11 Adapter
PIC ICSP to RJ11 Adapter
Adapter for connecting PICKIT3, PICKIT4 or SNAP to boards with RJ11 connector as ICSP and emulator interface.
Adapter for connecting PICKIT3, PICKIT4 or SNAP to boards with RJ11 connector as ICSP and emulator interface.
Order Code
PIC-ICSP-RJ11
PIC-ICSP-RJ11
Price: $25.75
USB PIC Keyfob Programmer Kit
PIC USB Keyfob Mini-programmer Starter Kit
Single individual USB PIC keyfob mini-programmer with USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Single individual USB PIC keyfob mini-programmer with USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Order Code
PIC-KF0010U
PIC-KF0010U
Price: $99.00
Single PIC Keyfob Programmer
PIC USB Keyfob Mini-programmer
Single individual USB PIC keyfob mini-programmer WITHOUT USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Single individual USB PIC keyfob mini-programmer WITHOUT USB PC loader and software for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families...
Order Code
PIC-KF0020U
PIC-KF0020U
Price: $79.00
PIC USB keyfob Programmer Multipack
PIC USB Keyfob Mini-programmer Multi-Pack
A Pack of 5 individual USB PIC keyfob mini-programmers for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families. Ideal for field and production...
A Pack of 5 individual USB PIC keyfob mini-programmers for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families. Ideal for field and production...
Order Code
PIC-KF0030U
PIC-KF0030U
Price: $339.00
PIC USB Keyfob Field Service Pack
Field Service Pack for PIC USB Keyfob Mini-programmer
A Pack of 6 PIC portable USB keyfob mini-programmers for In System Programming of PIC16F and PIC18F flash microcontrollers plus a USB port PC Interface and software...
A Pack of 6 PIC portable USB keyfob mini-programmers for In System Programming of PIC16F and PIC18F flash microcontrollers plus a USB port PC Interface and software...
Order Code
PIC-KF0040U
PIC-KF0040U
Price: $389.00
Standalone Portable PIC Programmer
Standalone Portable PIC Programmer
The standalone Portable Programmer is a new more adaptable version of Kanda's long established HandHeld Programmer. It has 31 program slots that are loaded from the PC and selected using keypad
The standalone Portable Programmer is a new more adaptable version of Kanda's long established HandHeld Programmer. It has 31 program slots that are loaded from the PC and selected using keypad
Order Code
PIC-PP0110
PIC-PP0110
Price: $299.00
Portable AVR Programmer
Standalone Portable AVR Programmer
Portable AVR programmer with 31 slots for different targets. Easily loaded from PC, battery powered and simple to use...
Portable AVR programmer with 31 slots for different targets. Easily loaded from PC, battery powered and simple to use...
Order Code
PP0110
PP0110
Price: $299.00
SAM Handheld Programmer Starter Kit
Atmel ARM SAMD-L-C Handheld Programmer Starter Kit
Atmel SAM D, C and L series are becoming increasingly popular. Kanda SAM programmer makes it easy to program these devices in production or to do firmware updates. Includes USB loader...
Atmel SAM D, C and L series are becoming increasingly popular. Kanda SAM programmer makes it easy to program these devices in production or to do firmware updates. Includes USB loader...
Order Code
SAM-HH0110
SAM-HH0110
Price: $189.00
SAM Handheld Programmer
Atmel ARM SAMD-L-C Handheld Programmer
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in production or to do firmware updates
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in production or to do firmware updates
Order Code
SAM-HH0120
SAM-HH0120
Price: $179.00
SAM D-L 8-way Starter Kit
Atmel ARM SAMD, SAMC and SAML 8-way Handheld Programmer Starter Kit
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in product
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in product
Order Code
SAM-HH0810
SAM-HH0810
Price: $209.00
SAMD-L 8-way Handheld Programmer
Atmel ARM SAMD, SAMC and SAM L 8-way Handheld Programmer
Atmel SAM D, SAM C and SAM L series use Cortex-M0 ARM core and are becoming increasingly popular. Kanda SAM programmer makes it simple to program these devices in production or fir
Order Code
SAM-HH0820
SAM-HH0820
Price: $199.00
UPDI 12V Adapter
ATtiny 12V UPDI Adapter
UPDI interface is supported on V3 version of Handheld Programmer only and AVRUPDI Programmer
Adapter to supply 12V pulse for ATtiny UPDI programming...
Adapter to supply 12V pulse for ATtiny UPDI programming...
Order Code
UPDI-12V
UPDI-12V
Price: $10.00