ProBee Embedded Zigbee Module-chip antenna

ProBee Embedded Zigbee Module with chip antenna

The ProBee-ZE10 is an all-in-one ZigBee OEM module with integrated ZigBee core and radio/antenna circuits together with high level software library so OEM manufacturers can easily and cost effectively integrate ZigBee functionality into target products in timely manner.

The ZE10 OEM module is designed to meet specific requirements of low cost and low power wireless applications such as home automation or smart energy by adopting the ZigBee technology. The ZE10 is based on the Ember EM250 ZigBee core and fully certified under the latest ZigBee Pro 2007 standard for the maximum compatibility.

Despite of its low cost and low power consumptions, the ZE10 provides high performance and robust data transfer capability for wide range of applications. The ZE10 can transfer data at up to 250 kbps and reach up to 1.6 km (1 miles) outdoor line-of-sight.

The ZE10 can be configured by the supplied Windows management tool or by using the modem AT command set to be a coordinator, a router or end point in a ZigBee network. Every ZigBee network must have one coordinator and can have lots of routers and end points. These embedded modules are generally configured as end points with a ZigBee USB or serial adapter as the coordinator for the system.

If you need more information about Zigbee, look at these guides:

• Guide to ZigBee Networks
• How to setup and run a ZigBee network using AT commands

---

Main Features

• Fully supports Zigbee®/Zigbee Pro 2007 wireless connectivity
• Integrated 2.4GHz, IEEE 802.15.4-compliant coprocessor
• On-board chip antenna
• Transmit Power: +20dBm E.I.R.P (max.)
• Receiver Sensitivity: -102dBm @1% BER
• TX Current: 190mA @3.3V (max.)
• RX Current: 45mA @3.3V (max.)
• Sleep Current: ≤ 2uA
• Full UART Signals Support: UART_TXD/RXD, RTS/CTS, DTR/DSR
• 4 Analog Inputs, 13 Digital Inputs/Outputs
• Supports various self management features wirelessly such as firmware upgrade and system configuration by using modem AT command set
• Easy to use Windows Configuration tool available

---

ProBee Zigbee Module Specification

	ProBee-ZE10
RF Characteristics	Frequency Band: 2.4 GHz Interface Immunity: DSSS Transmit Power: +20dBm E.I.R.P (max.) Receiver Sensitivity: -102dBm @1% BER RF Data Rate: 250 kbps Working Distance: Up to 1.6km using 5 dBi dipole antenna Various Antenna/Connector Options: Dipole 1/3/5dBi, U.FL, Chip Channels: 14 Channel Spacing: 5 MHz
ZigBee Network	Network topology: Mesh Stack profile: ZigBee / ZigBee Pro 2007 Network addressing: Channel, PAN ID, EPID
ZigBee Data Transmission	Unicasting Multicasting Broadcasting Many-to-One Communication Enhanced Reliability based on data retransmission
ZigBee Security	Network Layer security with one Trust Center for efficient operation 128 bit AES encryption algorithms Strong, NIST-approved security
Interfaces	Serial Data Interface: 1 UART Serial Data Rate: 1 Mbps ADC: 4 Inputs 13 Digital Inputs/Outputs
Device Management and Configuration	Configuration Method: AT Commands, ProBee Manager Remote Configuration Remote Firmware Upgrade using both Cloning and Pass-thru methods Supports rich neighborhood device scanning and monitoring using AT commands
Power Requirements	Supply Voltage: 2.7~3.6 VDC TX Current: 190mA @3.3V (max.) RX Current: 45mA @3.3V (max.) Sleep Current: ≤ 2uA
Physical Properties and Others	Pin: 2.0mm Pin Header 14 x 2 Size : 51.7 mm x 23.0 mm x 11.15 mm (2.03 in x 0.90 in x 0.43 in) Operating Temperature: -40˚C to 85˚C
Certification	FCC, CE, TELEC, KCC
Certification ID Number	ZIG10006PRV38490-24
Warranty	3-year limited warranty

---

About ZigBee wireless networks