Starter Kit for ProBee Embedded Zigbee Modules

Starter Kit for ProBee Zigbee Modules

The ProBee embedded Zigbee modules are designed so OEM manufacturers can easily and cost effectively integrate ZigBee functionality into target products in timely manner.
The modules are designed for low power consumption, and include an efficient Zigbee 2007 stack and all radio/antenna circuits, so you do not need to get involved with wireless design. As they use Zigbee standard they are compatible with Zigbee products from other manufacturers.

Zigbee is ideal for applications such as machine to machine communication, home automation and other networks that have moderate data transfer requirements and need to be flexible. Zigbee makes it easy to add nodes to the wireless network, or to remove them.

The ZE10 embedded modules can be configured by the supplied Windows management tool or by using the modem AT command set to be a coordinator, a router or end point in a ZigBee network. Every ZigBee network must have one coordinator and can have lots of routers and end points. These embedded modules are generally configured as end points with a ZigBee USB or serial adapter as the coordinator for the system.

If you need more information about Zigbee, look at these guides:

• Guide to ZigBee Networks
• How to setup and run a ZigBee network using AT commands

---

ProBee Zigbee Module Features
ProBee Zigbee modules come with three antenna options for flexibility. The simplest has a chip antenna built into the module, so no external antenna is required. The other two options use external antenna, either with a right Hand SMA connector or a U.FL connector. Antenna leads and different antennas are available depending on your range requirements.

The modules have low current consumption, less than 2uA in sleep mode, which makes them ideal for battery powered units. Each module has 4 Analog Inputs, 13 Digital Inputs/Outputs and a UART interface with data rates of 1MBit/s. Please see individual module description for full technical details.

---

ProBee Starter Kit for ZigBee Networks
The starter kit contains everything you need to get a ZigBee network up and running, including three development boards and full software. The management software included in the starter kit creates Zigbee network configuration extremely easily, and the three development boards and modules allows full setup and test of your new network.

Each motherboard has a module, serial and USB ports, digital I/O, ADC inputs, LEDs, switches and battery holders, if needed.

ProBee ZigBee Starter Kit Contents

Order Code				Description			Quantity
ZE10C-00				ProBee ZE10 ZigBee OEM Module w/ Chip Antenna			1
ZE10U-00				ProBee ZE10 ZigBee OEM Module w/ U.FL Connector			1
ZE10S-00				ProBee ZE10 ZigBee OEM Module w/ RPSMA Connector			1
DAT-G01R				3 dBi Dipole Antenna, RP-SMA Plug, Right-hand Thread			2
UEC-G01R				12cm U.FL to RPSMA Cable, Right-Hand Thread			1
				Development Board			3
				DC Power Adapter (International)			3
				CD-ROM			1
				Serial cable			3
				USB cable			3

Fast and simple Zigbee wireless networks for OEM manufactures. These modules are also available as complete enclosed products with USB and serial inputs for wireless networking existing products, and providing a PC connection.

---

About ZigBee wireless networks