AVR JTAG ICE MkII Emulator with PDI
AVR JTAG ICE MKII Emulator for all AVR microntrollers
New AVR Emulator that is fully compatible with Atmel's AVR JTAGICE MkII, except it does not have RS232 and Atmel firmware update. Like AVR JTAGICE MkII, it interfaces with AVRStudio
Shipping to United States
Recorded Airmail: $15.00
Fedex Express: $29.00
Order Code
JTAGAVR-IICN
Price: $199.00
Discontinued
Related Products
Product Details | |
AVR JTAG ICE MKII Emulator for all AVR microntrollers
New AVR Emulator that is fully compatible with Atmel's AVR JTAGICE MkII, except it does not have RS232 and Atmel firmware update. Like AVR JTAGICE MkII, it interfaces with AVRStudio development environment and AVRDude programming software to give full source level debugging on your own hardware, in real time.
Main Features of JTAGAVR IICN ICE
- Fully compatible with AVR JTAGICE mkII, Type B, except it does not support RS232 or firmware upgrades via AVRStudio
- Operates from Atmel AVRStudio software and AVRDUDE
- Allows emulation of all AVR microcontrollers with a JTAG, PDI or debugWire interface
- Allows programming of all AVR microcontrollers supported by AVRDude software
- Allows debugging of code written both in Assembler and C language
- Connection to PC through USB port
- Does not allow software upgrade from AVRStudio for new device support, please contact us for firmware upgrade
- Three built-in LED indicators show operation
- Standard 10-pin connector to the target circuit in Atmel format, plus other connectors
- Power can be taken from USB, or from external power supply
Differences between JTAGAVRU, JTAGAVR-II and JTAGAVR-IICN
- JTAGAVRU
- Very low cost
- Limited device support
- JTAG only
- Includes adapters for STK200
- USB Port only
- Firmware upgrade via AVRStudio
- JTAGAVR-II
- JTAG and DebugWire
- AVR, AVR32 and Xmega
- USB and COM Port
- New device support via AVRStudio
- JTAGAVR-IICN
- JTAG, PDI and DebugWire
- AVR, AVR32 and Xmega
- USB Port only
- New device support via separate firmware update
AVR Microcontroller Support
- AT90CAN - AVR with on-chip CAN : AVR microcontroller with on-chip CAN
- ATmega AVR32 - 32-bit AVR Microcontroller Family
- ATmega AVR - AVR 8-bit Microcontroller Family
- ATtiny AVR - Small pin count AVR Microcontroller Family
- ATxMega devices - JTAG and PDI
JTAGICE MkIICN Details
AVRStudio is the free development environment from Atmel, and is one of the best in the world. It includes an assembler and a C compiler, and the JTAGICE IICN can be used from either. It supports breakpoints, single step and run.
The emulator can be used with all the more recent AVR ATmega and ATtiny devices that have either a JTAG interface or the single wire debugInterface. The new AVR32 family is also supported by this flexible tool, using AVR32 Studio. Xmega Devices are supported by PDI and JTAG.
AVR JTAGICE IICN Contents
- AVR JTAGICE IICN emulator
- Cable terminated with IDC 10 plugs for connection of the emulator to the target circuit
- USB cable for connection of the emulator with a PC
- Cables for 6-pin ISP, 10-pin ISP and JTAG without Reset signal
- CD with documentation and software
Using this tool with STK200 and STK300 boards
STK300 boards
- JTAG, connect to JTAG header on board
- DebugWire, see note below
STK200
- JTAG - you will need adapters to connect to port pins
- DebugWire - see note<
DebugWire
The STK200 and STK300 boards need a small modification to operate with DebugWire (replace diode D1 with wire link) but please contact support for full information.
Ordering Information
Ordering Information |
Order Code: JTAGAVR-IICN |
Price: $199.00 |
Shipping to United States: | Recorded airmail - $15.00 | Fedex Express - $29.00 |